All Vessel Listings[354 listings]

Click here to be notified of updates to the All Vessel Listings pagewatch helphelp
« first ‹ previous next › last »
Vessels 1 - 50 of 354
$300,000
SP15-006  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 44    Hull: Fiberglass    Builder: Seahorse    Location: Alaska
44'x12' fiberglass gillnetter, built by Seahorse. Original construction in 1978, but complete rebuild in 2015. Deck, fishhold, tanks, and house aft bulkhead removed and refabricated. New deck gear, shaft and steering ram. John Deere 6068 rated at 205 hp, Northern Light 6kw gen set. New Maritime Fab drum and roller, new PL2 boom winch. Electronics include GPS, (2) VHF, Furuno radar, sounder, plotter, autopilot, and new Furuno Navnet. Too much recent work to describe. Call for details. Asking $300,000, $400,000 w/ SE drift permit.
$240,000
thumbnail PK15-010  Boat/Permit Pkgs You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 53.3    Hull: Fiberglass    Builder: Skookum    Location: Washington
53.3'x15.3'x8.9' blast freeze sailing tuna/salmon vessel built in 1978 by Skookum. Detroit 4-71 main. Twin Disc gear. Northern Lights 8.5 kw generator. 650 cubic ft. fish hold. Air blast freeze system installed new in 2014. 1,600 gallons fuel, 400 gallons water. Dacron sails, Junes tuna pullers, (2) Kolstrand 3 spool gurdies, two aluminum booms and 8' Livingston with new outboard. 4 man life raft. Electronics include Furuno sounder, (2) Furuno radar, (2) Furuno GPS, Furuno plotter, (2) VHF, laptop with navigation software, Qualcomm Sat Phone and ComNav autopilot. OR salmon troll permit included. Asking $240,000.
$240,000
thumbnail TN15-005  Tuna You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 53.3    Hull: Fiberglass    Builder: Skookum    Location: Washington
53.3'x15.3'x8.9' blast freeze sailing tuna/salmon vessel built in 1978 by Skookum. Detroit 4-71 main. Twin Disc gear. Northern Lights 8.5 kw generator. 650 cubic ft. fish hold. Air blast freeze system installed new in 2014. 1,600 gallons fuel, 400 gallons water. Dacron sails, Junes tuna pullers, (2) Kolstrand 3 spool gurdies, two aluminum booms and 8' Livingston with new outboard. 4 man life raft. Electronics include Furuno sounder, (2) Furuno radar, (2) Furuno GPS, Furuno plotter, (2) VHF, laptop with navigation software, Qualcomm Sat Phone and ComNav autopilot. OR salmon troll permit included. Asking $240,000.
$300,000
thumbnail SE15-007  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1981    Length: 42    Hull: Fiberglass    Builder: LeClercq    Location: California
42'x15'x4' fiberglass pocket seiner built by Leclerq in 1981. John Deere 6068 AFM85 250hp main, installed 2014, with Twin Disk 507 2:1 gear. Yukon Power Systems 40 kw aux installed 2014. Currently rigged as light/brail boat for California squid fishery. Call for complete survey. Asking $300,000 for boat alone or $500,000 with squid light/brail permit.
$300,000
thumbnail CR15-018  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1981    Length: 42    Hull: Fiberglass    Builder: LeClercq    Location: California
42'x15'x4' fiberglass pocket seiner built by Leclerq in 1981. John Deere 6068 AFM85 250hp main, installed 2014, with Twin Disk 507 2:1 gear. Yukon Power Systems 40 kw aux installed 2014. Currently rigged as light/brail boat for California squid fishery. Call for complete survey. Asking $300,000 for boat alone or $500,000 with squid light/brail permit.
$300,000
thumbnail CO15-011  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1981    Length: 42    Hull: Fiberglass    Builder: LeClercq    Location: California
42'x15'x4' fiberglass pocket seiner built by Leclerq in 1981. John Deere 6068 AFM85 250hp main, installed 2014, with Twin Disk 507 2:1 gear. Yukon Power Systems 40 kw aux installed 2014. Currently rigged as light/brail boat for California squid fishery. Call for complete survey. Asking $300,000 for boat alone or $500,000 with squid light/brail permit.
$265,000
thumbnail TN15-004  Tuna You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1996    Length: 29.7    Hull: Fiberglass    Builder: Little Hoquiam    Location: Oregon
29.7'x11.7'x2.9' longline/crab/troll package with permits included. Built in 1996 by Little Hoquiam. Cummins main rated at 220 hp. Twin Disk 502 2:1 gear. 250 gallons fuel capacity in two aluminum tanks. 450 cu. ft. hold, packs 9,000# crab. Crab block and longline hauler with stainless steel shivs and 3 spool Kohlstrand troll gurdies. Longline gear, approximately 275 34" crab pots and full compliment of salmon trolling gear. Other equipment included is a 13'x8' freezer, 16' 48 crab pot flatbed trailer and lots of spare parts and additional equipment. Electronics include GPS system, (2) VHF, VMS, Furuno 16 mile radar, Furuno 1,000W sounder, plotter, Raymarine autopilot and 3,000W inverter.Permits include are OR 300 pot crab, OR salmon troll, and OR live fish endorsed permits, asking $265,000. Also available, but not included, is a Tier III longline endorsed permit with all gear.
$140,000
thumbnail PK15-009  Boat/Permit Pkgs You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1964    Length: 41    Hull: Wood    Builder: Williams Bros    Location: Oregon
41'x12'x6' blast freezer salmon/tuna troller with WA/OR troll permits. Built in 1964 by Williams Bros. GM 471 main. Twin Disc gear. Isuzu 25kw generator. 12,000 pounds capacity. 7 ton chiller new in 2014. Dual blast freezers installed in 2013. 3 spool Easthope gurdies, bow poles, new troll wire and new salmon and tuna gear. Electronics include (2) GPS, (2) VHF, 1 radar, (2) sounder autopilot and inverter. WA and OR salmon troll permits included. Asking $140,000.
$140,000
thumbnail TR15-018  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1964    Length: 41    Hull: Wood    Builder: Williams Bros    Location: Oregon
41’x12’x6’ blast freezer salmon/tuna troller with WA/OR troll permits. Built in 1964 by Williams Bros. GM 471 main. Twin Disc gear. Isuzu 25kw generator. 12,000 pounds capacity. 7 ton chiller new in 2014. Dual blast freezers installed in 2013. 3 spool Easthope gurdies, bow poles, new troll wire and new salmon and tuna gear. Electronics include (2) GPS, (2) VHF, 1 radar, (2) sounder autopilot and inverter. WA and OR salmon troll permits included. Asking $140,000.
$450,000
thumbnail SE15-006  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1972    Length: 58    Hull: Steel    Builder: Chester Thompson    Location: Alaska
58'x17'x8' steel, Monk design, combination vessel, built by Chester Thompson in 1972. Cummins 855 main with Twin Disk 509 gear. Northern Lights 12kw and Northern Lights 30kw aux's. Packs 60,000 #s in insulated tanked hold. Currently rigged for longline. Full electronics package includes GPS, (2) VHF, SSB, computer, radar, (2) sounder, (3) plotter, VMS, and auto pilot. Asking $450,000.
$450,000
thumbnail TR15-019  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1972    Length: 58    Hull: Steel    Builder: Chester Thompson    Location: Alaska
58'x17'x8' steel, Monk design, combination vessel, built by Chester Thompson in 1972. Cummins 855 main with Twin Disk 509 gear. Northern Lights 12kw and Northern Lights 30kw aux's. Packs 60,000 #s in insulated tanked hold. Currently rigged for longline. Full electronics package includes GPS, (2) VHF, SSB, computer, radar, (2) sounder, (3) plotter, VMS, and auto pilot. Asking $450,000.
$450,000
thumbnail LL15-006  Longliner You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1972    Length: 58    Hull: Steel    Builder: Chester Thompson    Location: Alaska
58'x17'x8' steel, Monk design, combination vessel, built by Chester Thompson in 1972. Cummins 855 main with Twin Disk 509 gear. Northern Lights 12kw and Northern Lights 30kw aux's. Packs 60,000 #s in insulated tanked hold. Currently rigged for longline. Full electronics package includes GPS, (2) VHF, SSB, computer, radar, (2) sounder, (3) plotter, VMS, and auto pilot. Asking $450,000.
$450,000
thumbnail CO15-010  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1972    Length: 58    Hull: Steel    Builder: Chester Thompson    Location: Alaska
58'x17'x8' steel, Monk design, combination vessel, built by Chester Thompson in 1972. Cummins 855 main with Twin Disk 509 gear. Northern Lights 12kw and Northern Lights 30kw aux's. Packs 60,000 #s in insulated tanked hold. Currently rigged for longline. Full electronics package includes GPS, (2) VHF, SSB, computer, radar, (2) sounder, (3) plotter, VMS, and auto pilot. Asking $450,000.
$69,500
thumbnail SP15-005  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2005    Length: 35    Hull: Fiberglass    Builder: Gaski    Location: Alaska
35'x12'x4' fiberglass jig, longline, gillnet vessel built by Gaski in 2005. Cummings 500 hp main rebuilt 2013 and new ZF 2:1 gear. 20 kt cruise. (4) jig machines, reel w/level wind, 20 new skates of halibut gear. Electronics include GPS, VHF, radar, sounder, plotter, and sat phone. Asking $69,500.
$69,500
thumbnail LL15-005  Longliner You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2005    Length: 35    Hull: Fiberglass    Builder: Gaski    Location: Alaska
35'x12'x4' fiberglass jig, longline, gillnet vessel built by Gaski in 2005. Cummings 500 hp main rebuilt 2013 and new ZF 2:1 gear. 20 kt cruise. (4) jig machines, reel w/level wind, 20 new skates of halibut gear. Electronics include GPS, VHF, radar, sounder, plotter, and sat phone. Asking $69,500.
$69,500
thumbnail CO15-009  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2005    Length: 35    Hull: Fiberglass    Builder: Gaski    Location: Alaska
35'x12'x4' fiberglass jig, longline, gillnet vessel built by Gaski in 2005. Cummings 500 hp main rebuilt 2013 and new ZF 2:1 gear. 20 kt cruise. (4) jig machines, reel w/level wind, 20 new skates of halibut gear. Electronics include GPS, VHF, radar, sounder, plotter, and sat phone. Asking $69,500.
$139,000
thumbnail CH15-009  Charter You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1993    Length: 35    Hull: Fiberglass    Builder: Henriques    Location: Washington
35'x12'x3' fiberglass charter boat, lobster-style hull, built in 1993 by Henriques. Only 2,200 hrs on the boat. Cat 3116 rated at 300 hp, only 12 hrs on complete overhaul. Twin Disc gear. Burns 8 gph @ 16-18 kts. Electronics include GPS, VHF, radar, and plotter. Appr. 1,500# fish hold. Asking $139,000.
$260,000
thumbnail TR15-016  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 42    Hull: Steel    Builder: Pelletier    Location: British Columbia
42'x16' steel dragger, troller, built in Canada by Pelletier in 1990. GMC 671 rated at 200 hp, appr. 10,000 hours. Isuzu C240 gen set. Packs 30,000 in insultaed fish hold with plate freezer system. Net drum, trawl winches, (2) Pullmasters, capstan winch, and troll gurdies. Electronics include GPS, (2) VHF, SSB, computer w/ Nobeltec, ComNav pilot, radarm and sounder. Asking $260,000.
$260,000
thumbnail DR15-001  Draggers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 42    Hull: Steel    Builder: Pelletier    Location: British Columbia
42'x16' steel dragger, troller, built in Canada by Pelletier in 1990. GMC 671 rated at 200 hp, appr. 10,000 hours. Isuzu C240 gen set. Packs 30,000 in insultaed fish hold with plate freezer system. Net drum, trawl winches, (2) Pullmasters, capstan winch, and troll gurdies. Electronics include GPS, (2) VHF, SSB, computer w/ Nobeltec, ComNav pilot, radarm and sounder. Asking $260,000.
$260,000
thumbnail CO15-008  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 42    Hull: Steel    Builder: Pelletier    Location: British Columbia
42'x16' steel dragger, troller, built in Canada by Pelletier in 1990. GMC 671 rated at 200 hp, appr. 10,000 hours. Isuzu C240 gen set. Packs 30,000 in insultaed fish hold with plate freezer system. Net drum, trawl winches, (2) Pullmasters, capstan winch, and troll gurdies. Electronics include GPS, (2) VHF, SSB, computer w/ Nobeltec, ComNav pilot, radarm and sounder. Asking $260,000.
$66,000
thumbnail PK15-008  Boat/Permit Pkgs You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1942    Length: 38    Hull: Wood    Builder: US Navy    Location: Alaska
38'x10.6'x5' wood troller, built by the US Navy with cypress on oak in 1942. GM 671 main with Twin Disk 8708 mechanical 1.5:1 gear. Packs 2k #’s in slush, fiberglass hold. Electronics include GPS, (2) VHF, computer w/Nobeltec, radar, sounder, and auto pilot. Alaska power troll permit and all gear included. Asking $66,000.
$66,000
thumbnail TR15-014  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1942    Length: 38    Hull: Wood    Builder: US Navy    Location: Alaska
38'x10.6'x5' wood troller, built by the US Navy with cypress on oak in 1942. GM 671 main with Twin Disk 8708 mechanical 1.5:1 gear. Packs 2k #’s in slush, fiberglass hold. Electronics include GPS, (2) VHF, computer w/Nobeltec, radar, sounder, and auto pilot. Alaska power troll permit and all gear included. Asking $66,000.
$445,000
thumbnail PK15-007  Boat/Permit Pkgs You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 41.5    Hull: Fiberglass    Builder: Modutech    Location: Oregon
41.5'x11.5'x5' fiberglass crabber/troller, built in 1979 by Modutech. Partially enclosed tophouse. GMC 6V92 rated at 300 hp, 7.5 kw Whisper Watt gen set. Bait chopper, 17" crab block on davit, and 3 spool Simplex gurdies. Electronics include (2) GPS, (2) VHF, radar, (2) sounders, plotter, and ComNav autopilot. 4-man liferaft. Comes WITH 250 pot CA crab, 300 pot OR crab, and OR salmon troll licenses. Asking $445,000.
$445,000
thumbnail TR15-015  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 41.5    Hull: Fiberglass    Builder: Modutech    Location: Oregon
41.5'x11.5'x5' fiberglass crabber/troller, built in 1979 by Modutech. Partially enclosed tophouse. GMC 6V92 rated at 300 hp, 7.5 kw Whisper Watt gen set. Bait chopper, 17" crab block on davit, and 3 spool Simplex gurdies. Electronics include (2) GPS, (2) VHF, radar, (2) sounders, plotter, and ComNav autopilot. 4-man liferaft. Comes WITH 250 pot CA crab, 300 pot OR crab, and OR salmon troll licenses. Asking $445,000.
$445,000
thumbnail CR15-017  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 41.5    Hull: Fiberglass    Builder: Modutech    Location: Oregon
41.5'x11.5'x5' fiberglass crabber/troller, built in 1979 by Modutech. Partially enclosed tophouse. GMC 6V92 rated at 300 hp, 7.5 kw Whisper Watt gen set. Bait chopper, 17" crab block on davit, and 3 spool Simplex gurdies. Electronics include (2) GPS, (2) VHF, radar, (2) sounders, plotter, and ComNav autopilot. 4-man liferaft. Comes WITH 250 pot CA crab, 300 pot OR crab, and OR salmon troll licenses. Asking $445,000.
$445,000
thumbnail CO15-007  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 41.5    Hull: Fiberglass    Builder: Modutech    Location: Oregon
41.5'x11.5'x5' fiberglass crabber/troller, built in 1979 by Modutech. Partially enclosed tophouse. GMC 6V92 rated at 300 hp, 7.5 kw Whisper Watt gen set. Bait chopper, 17" crab block on davit, and 3 spool Simplex gurdies. Electronics include (2) GPS, (2) VHF, radar, (2) sounders, plotter, and ComNav autopilot. 4-man liferaft. Comes WITH 250 pot CA crab, 300 pot OR crab, and OR salmon troll licenses. Asking $445,000.
$1,750,000
thumbnail TE15-004  Tenders You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2001    Length: 76    Hull: Steel    Builder: Wahl    Location: Alaska
76'x30'x12' steel combination freezer/RSW vessel, rigged for pots, longline, and tendering. Built by Wahl in 2001. Cat 3412 main rated at 720 hp. (2) Cat 3306 190 kw and (1) Deere 65 kw gen sets. Mustad Autoline system. Full shelter deck. Well-insulated holds are equipped with freezer coils (200,000#) or RSW (300,000#) with 50 ton compressor. Bait hold, ice machine, and watermaker. Deck crane and cargo boom. Complete electronics. Unique vessel provides lots of opportunity. Call for details. Asking $1,750,000.
$1,750,000
thumbnail CR15-016  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2001    Length: 76    Hull: Steel    Builder: Wahl    Location: Alaska
76'x30'x12' steel combination freezer/RSW vessel, rigged for pots, longline, and tendering. Built by Wahl in 2001. Cat 3412 main rated at 720 hp. (2) Cat 3306 190 kw and (1) Deere 65 kw gen sets. Mustad Autoline system. Full shelter deck. Well-insulated holds are equipped with freezer coils (200,000#) or RSW (300,000#) with 50 ton compressor. Bait hold, ice machine, and watermaker. Deck crane and cargo boom. Complete electronics. Unique vessel provides lots of opportunity. Call for details. Asking $1,750,000.
$1,750,000
thumbnail featured listing LL15-004  Longliner You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2001    Length: 76    Hull: Steel    Builder: Wahl    Location: Alaska
76'x30'x12' steel combination freezer/RSW vessel, rigged for pots, longline, and tendering. Built by Wahl in 2001. Cat 3412 main rated at 720 hp. (2) Cat 3306 190 kw and (1) Deere 65 kw gen sets. Mustad Autoline system. Full shelter deck. Well-insulated holds are equipped with freezer coils (200,000#) or RSW (300,000#) with 50 ton compressor. Bait hold, ice machine, and watermaker. Deck crane and cargo boom. Complete electronics. Unique vessel provides lots of opportunity. Call for details. Asking $1,750,000.
$1,750,000
thumbnail CO15-006  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2001    Length: 76    Hull: Steel    Builder: Wahl    Location: Alaska
76'x30'x12' steel combination freezer/RSW vessel, rigged for pots, longline, and tendering. Built by Wahl in 2001. Cat 3412 main rated at 720 hp. (2) Cat 3306 190 kw and (1) Deere 65 kw gen sets. Mustad Autoline system. Full shelter deck. Well-insulated holds are equipped with freezer coils (200,000#) or RSW (300,000#) with 50 ton compressor. Bait hold, ice machine, and watermaker. Deck crane and cargo boom. Complete electronics. Unique vessel provides lots of opportunity. Call for details. Asking $1,750,000.
$40,000
thumbnail SK15-001  Skiffs You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Length: 18    Hull: Aluminum    Builder: Post Point    Location: Washington
18'x10' Post Point seine skiff used as a boom deployment vessel. Cummins 6BTA 5.9 with only 1,400 hours. Stainless steel exhaust. Twin Disc gear. Stainless wheel and rudder. All manuals and service records available. Asking $40,000.
$250,000
thumbnail CH15-008  Charter You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1976    Length: 65    Hull: Fiberglass    Builder: Kelly    Location: Washington
65'x19'x6.8' charter boat, built in 1976 by Kelly. Current COI for 50 persons. Fiberglass hull w/ aluminum house. Twin GMC 8V92 mains rated at 400 hp each, Twin Disc 514 gears. 40 kw Mitsubishi gen set. Large accommodations with 16 bunks. 1,700 gallons fuel, 115 water. Electronics include SEA222 SSB, (2) VHF, radar, GPS/plotter, autopilot, video sounder, and more. Comes with 30 poles and fishing gear. WA 48 pole charter permit available. Vessel is actively working and has good future bookings. Asking $250,000 for the boat w/o permit.
$79,500
thumbnail BB15-009  Bristol Bay You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1992    Length: 32    Hull: Fiberglass    Builder: Uniflite    Location: Alaska
32'x13.5'x3' fiberglass Bay boat built by Uniflite in 1992. Mitsubishi 6D22TC 350 hp main with 6,360 hours. ZF 1RM301P2 1.89:1 gear. (4) shackle reel with Twister drive. Kinematic 38” power roller. Electronics include (2) GPS, (2) VHF, radar, sounder, and plotter. Asking $79,500.
$350,000
thumbnail CR15-015  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 42    Hull: Aluminum    Builder: Hydraulic Fishing Supply    Location: Alaska
42'x14.5'x4' combination seiner/gillnet vessel built in 1990 by Hydraulic Fishing Supply. Recently rebuilt twin Cat 3208 mains rated at 850 total horsepower. Recently rebuilt Twin Disc gears and new shafts. New 30kw Kabota generator and 12 ton RSW system. New hydraulic system including (2) 8.6 Eaton compensating pumps. Maritime Fab power roller and auto levelwind. Electronics include (3) VHF, ComNav autopilot, Furuno radar, Furuno color sounder, laptop and Furuno GPS. lots of recent work. Can be available with the seine package. Gillnet ready, asking $350,000.
$350,000
thumbnail SE15-005  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 42    Hull: Aluminum    Builder: Hydraulic Fishing Supply    Location: Alaska
42'x14.5'x4' combination seiner/gillnet vessel built in 1990 by Hydraulic Fishing Supply. Recently rebuilt twin Cat 3208 mains rated at 850 total horsepower. Recently rebuilt Twin Disc gears and new shafts. New 30kw Kabota generator and 12 ton RSW system. New hydraulic system including (2) 8.6 Eaton compensating pumps. Maritime Fab power roller and auto levelwind. Electronics include (3) VHF, ComNav autopilot, Furuno radar, Furuno color sounder, laptop and Furuno GPS. lots of recent work. Can be available with the seine package. Gillnet ready, asking $350,000.
$100,000
thumbnail CR15-014  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1976    Length: 37.7    Hull: Fiberglass    Builder: Westport Shipyard    Location: Washington
37.7'x11.8'x4.6' Puget Sound dive vessel built in 1976 by Westport Shipyard Inc. Low hours on a Volvo TAMD 74E main rated at 450 hp. Twin Disc gear. 17 knot @ WOT, 12 knot cruise. Quincy 325 dive compressor. Aluminum 300 gallon fuel capacity. Electronics include (2) VHF, Furuno color sounder and Furuno 32 mile radar. Nice clean vessel, turnkey, ready to work. Price reduced to $100,000.
$100,000
thumbnail TR15-013  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1976    Length: 37.7    Hull: Fiberglass    Builder: Westport Shipyard    Location: Washington
37.7'x11.8'x4.6' Puget Sound dive vessel built in 1976 by Westport Shipyard Inc. Low hours on a Volvo TAMD 74E main rated at 450 hp. Twin Disc gear. 17 knot @ WOT, 12 knot cruise. Quincy 325 dive compressor. Aluminum 300 gallon fuel capacity. Electronics include (2) VHF, Furuno color sounder and Furuno 32 mile radar. Nice clean vessel, turnkey, ready to work. Price reduced to $100,000.
$100,000
thumbnail SP15-004  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1976    Length: 37.7    Hull: Fiberglass    Builder: Westport Shipyard    Location: Washington
37.7'x11.8'x4.6' Puget Sound dive vessel built in 1976 by Westport Shipyard Inc. Low hours on a Volvo TAMD 74E main rated at 450 hp. Twin Disc gear. 17 knot @ WOT, 12 knot cruise. Quincy 325 dive compressor. Aluminum 300 gallon fuel capacity. Electronics include (2) VHF, Furuno color sounder and Furuno 32 mile radar. Nice clean vessel, turnkey, ready to work. Price reduced to $100,000.
$150,000
thumbnail SP15-003  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1982    Length: 38    Hull: Fiberglass    Builder: Mel Martin    Location: Alaska
38'x13' Mel Martin sternpicker, flush deck w/ RSW, built in 1982. Volvo 71D rated at 380 hp, Twin Disc 507 gear. Packs about 16,000# with hydraulically driven IMS 7.5 ton RSW system. Large sliding Kinematics drum w/ levelwind. Electronics include radar, GPS, plotter, VHF, and sounder. Complete Area M operation. Asking $150,000 for boat alone. Area M permit available at market price.
$395,000
thumbnail CO15-005  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2010    Length: 34    Hull: Fiberglass    Builder: Calvin Beal    Location: Oregon
34'x13'x3.6' fiberglass lobster hull design combination troll/gillnet package built in 2012 by Calvin Beal. Cummins QSC 8.3 rated at 500 hp with only 500 hours. 4.5 tons fish hold capacity in 5 insulated fiberglass fish holds. 7.5 ton IMS RSW system. Kolstrand 3 spool gurdies, Warren Junes Tuna pullers and aluminum hayrack. Stainless steel anchor winch. Electronics include (2) GPS, VHF, satellite phone, laptop computer with navigation software and autopilot. Includes CA and OR salmon troll permits. Asking $395,000.
$395,000
thumbnail PK15-006  Boat/Permit Pkgs You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2010    Length: 34    Hull: Fiberglass    Builder: Calvin Beal    Location: Oregon
34'x13'x3.6' fiberglass lobster hull design combination troll/gillnet package built in 2012 by Calvin Beal. Cummins QSC 8.3 rated at 500 hp with only 500 hours. 4.5 tons fish hold capacity in 5 insulated fiberglass fish holds. 7.5 ton IMS RSW system. Kolstrand 3 spool gurdies, Warren Junes Tuna pullers and aluminum hayrack. Stainless steel anchor winch. Electronics include (2) GPS, VHF, satellite phone, laptop computer with navigation software and autopilot. Includes CA and OR salmon troll permits. Asking $395,000.
$395,000
thumbnail TR15-012  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2010    Length: 34    Hull: Fiberglass    Builder: Calvin Beal    Location: Oregon
34'x13'x3.6' fiberglass lobster hull design combination troll/gillnet package built in 2012 by Calvin Beal. Cummins QSC 8.3 rated at 500 hp with only 500 hours. 4.5 tons fish hold capacity in 5 insulated fiberglass fish holds. 7.5 ton IMS RSW system. Kolstrand 3 spool gurdies, Warren Junes Tuna pullers and aluminum hayrack. Stainless steel anchor winch. Electronics include (2) GPS, VHF, satellite phone, laptop computer with navigation software and autopilot. Includes CA and OR salmon troll permits. Asking $395,000.
$485,000
thumbnail CR15-013  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2015    Length: 50    Hull: Steel    Location: California
50'x16'x6.6' new construction combination crab/troll vessel. John Deere 6068 main rated at 201 hp. Twin Disc MG 5061 gear. Monel tail shaft. 2,000 fuel capacity. 580 gallons fresh water capacity. 800 cubic ft. foamed and fiberglass fish hold. Simplex gurdies, stainless steel davits and aluminum trolling poles. Anchor winch and gear. ComNav autopilot. Apitong deck. Vessel has a yacht like finish inside. Asking $485,000.
$485,000
thumbnail TR15-011  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2015    Length: 50    Hull: Steel    Location: California
50'x16'x6.6' new construction combination crab/troll vessel. John Deere 6068 main rated at 201 hp. Twin Disc MG 5061 gear. Monel tail shaft. 2,000 fuel capacity. 580 gallons fresh water capacity. 800 cubic ft. foamed and fiberglass fish hold. Simplex gurdies, stainless steel davits and aluminum trolling poles. Anchor winch and gear. ComNav autopilot. Apitong deck. Vessel has a yacht like finish inside. Asking $485,000.
$240,000
thumbnail PK15-005  Boat/Permit Pkgs You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1949    Length: 48.6    Hull: Wood    Builder: K Carter    Location: California
48.6'x14'x6' combination California troll/crab package built in 1949 by K Carter. GMC 471 main rated at 190 hp. Capitol gear. Nassau 8 kw generator. 5,000 pound crab tank with a hydraulic lift. 4,000 pound insulated slush salmon tank. Stainless steel hayrack with 3 spool Kolstrand gurdies. Electronics include a Furuno 1650 GPS, Icom VHF, Furuno 48 mile radar, Raytheon sounder and a ComNav autopilot. Comes with a CA 250 pot permit, approximately 250 pots and a CA salmon troll permit. Asking $240,000.
$240,000
thumbnail CR15-012  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1949    Length: 48.6    Hull: Wood    Builder: K Carter    Location: California
48.6'x14'x6' combination California troll/crab package built in 1949 by K Carter. GMC 471 main rated at 190 hp. Capitol gear. Nassau 8 kw generator. 5,000 pound crab tank with a hydraulic lift. 4,000 pound insulated slush salmon tank. Stainless steel hayrack with 3 spool Kolstrand gurdies. Electronics include a Furuno 1650 GPS, Icom VHF, Furuno 48 mile radar, Raytheon sounder and a ComNav autopilot. Comes with a CA 250 pot permit, approximately 250 pots and a CA salmon troll permit. Asking $240,000.
$240,000
thumbnail TR15-010  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1949    Length: 48.6    Hull: Wood    Builder: K Carter    Location: California
48.6'x14'x6' combination California troll/crab package built in 1949 by K Carter. GMC 471 main rated at 190 hp. Capitol gear. Nassau 8 kw generator. 5,000 pound crab tank with a hydraulic lift. 4,000 pound insulated slush salmon tank. Stainless steel hayrack with 3 spool Kolstrand gurdies. Electronics include a Furuno 1650 GPS, Icom VHF, Furuno 48 mile radar, Raytheon sounder and a ComNav autopilot. Comes with a CA 250 pot permit, approximately 250 pots and a CA salmon troll permit. Asking $240,000.
$145,000
thumbnail BP15-002  Bowpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1995    Length: 32    Hull: Aluminum    Builder: Master Marine    Location: California
32'x14'x2' aluminum bowpicker built by Master Marine in 1995. Twin volvo 63p 318hp mains, Velvet Drive 1.25:1 gears, and Hamilton 273 jet pumps. Cruise at 15 kts and 26 kts top speed. Packs 25k lbs of salmon in (9) hatches. Double insulated slush bags and (18) brailer bags. Asking $145,000.
$135,000
thumbnail BG15-001  Barges You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 76.1    Hull: Steel    Builder: Marco    Location: Alaska
76.1'x23.5'x3' steel tank barge built by MARCO in 1990. 61,000 gal capacity in (6) individual compartments, never used as fuel barge. Northern Lights 20 kw genset for electrical and Lister auxiliary for hydraulics. Marco anchor winch. Hydraulic deck crane. Asking $135,000.
$550,000
thumbnail CR15-011  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 89    Hull: Steel    Builder: Halls Mill    Location: Alabama
89'x22.4'x11.2' combination vessel in 1979, but completely rebuilt including 60% hull re-plating. Cat 3412 main rated at 600 hp, recently rebuilt with only 600 hours. Cummins 100 kw with 163 hours, Cummins 80 kw with 2.9 hours and Isuzu 12.5 kw generator. 3,500 cubic ft. fish hold. Complete refrigeration package with two screw compressor. All new safety gear. Electronics include GPS, VHF, Furuno radar, plotter and autopilot. Has 5 staterooms with 10 berths. Asking $550,000.
Web Design, 3 Crown Creative