Seiners[18 listings]

Click here to be notified of updates to the Seiners pagewatch helphelp

Vessels 1 - 18 of 18
$750,000
thumbnail featured listing SE14-013  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 50    Hull: Fiberglass    Builder: Little Hoquiam    Location: Seattle at Fishermans Terminal
50'x14.6'x5.5' fiberglass tophouse seiner built in 1990 by Little Hoquiam. Lugger 6140 main rated at 550 hp. Isuzu 20kw genset. Packs 50,000# in 2 tanks. 18 ton RSW system new in 2013. Bow thruster. Marco 26Ò€ 2 speed power block with gripper. Kolstrand deck winch with new chain and gear. Kolstrand anchor winch. Furuno GPS, (2) VHF, SSB, 12 volt custom computer, Furuno radar, Furuno and Datamarine sounders, ComNav autopilot, Wesmar sonar, 2 inverters, Trac phone, 2 meter radio and watch alarm. Everything replaced in stern last winter including fuel tanks, steering ram with stainless mounts and rudder bearings, steering lines and gel coat and non skid. New shaft and cutlass bearings fitted to coupling and prop. Also available but not included is a PWS seine permit and seine. Very comfortable vessel in top shape, asking $750,000.
$235,000
thumbnail SE14-015  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1975    Length: 51.8    Hull: Wood    Builder: Wahl    Location: British Columbia
51.8'x16.8'x8' Wahl built converted seiner to charter vessel, constructed in 1975. Detroit 8V71 with only 5,400 hours. Allison gear. Kubota 3 cylinder generator. Marco PTO 4 pump. 4 fiberglass tanks can be used for ballast. 3 staterooms sleep 10 people. Galvanized steel boom and mast. Pullmaster topping, single and vanging. 19Ò€ bow thruster. All proper safety gear. Electronics include a Furuno GPS, (2) Icom VHF, ICom SSB, Computer with Nobeltec chart plotting software, Sitex sounder, Mark 4 autopilot, trace inverter and a Kenwood 2000 receiver. Nice live aboard, coastal cruiser. Asking $235,000.
Call for Pricing!
thumbnail SE14-010  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1925    Length: 62    Hull: Wood    Builder: Skansi    Location: Alaska
62'x15.5'x7' grandfathered for AK seiner, built in 1925 by Skansi Shipyard. Detroit 8-71 main with 2 seasons on a rebuild. Twin Disc gear. 900 gallons fuel capacity. Isuzu 20 kw generator. 10 ton RSW. Boom with slider, vanging, deck winch and power block. Radar, GPS, VHF, SSB, sounder and plotter. Recently had hull work completed. Seine net included. Looking for offers!
$1,600,000
thumbnail SE14-012  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2000    Length: 59    Hull: Steel    Builder: Wahl    Location: Washington
59.5’x28.5’x14’ steel longliner, built in 2000 by Wahl Marine. Cat 3412 main rated at 615 hp. Reintjes 6:1 gear. Cat 190 kw, 105 kw, and 65 kw gen sets. Fully rigged for longlining with full shelter deck. Bulbous bow with bow thruster. Knuckle boom w/ 3,000# capacity. Appr. 4,240 cu ft fish hold. 13,000+ gal fuel, 2,300+ gal water. Extensive electronics. Sleeps 9+ crew. Fully rigged longliner. Asking $1,600,000. Call for details.
$160,000
thumbnail SE14-011  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1973    Length: 52    Hull: Fiberglass    Builder: Wakefield Sons, Inc.    Location: Alaska
52’x15.8’x8.5’ fiberglass combination seine, longline and cod jigging vessel built by Wakefield Sons Inc. in 1973. Detroit 8V71NA main rated a 300 hp. Twin Disc 509 gear. Yanmar 13kw generator. Yahmaha generator. 1,350 gallons fuel capacity. 5” main boom, (3) jigging machines, Kolstrand longline hauler, Westort 17” line hauler, Marco crab hauler, steel pipe davit with hydraulic ram, KEM longline reel, 6’ aluminum main boom with trolly and vang winches. Electronics include Raytheon radar, Furuno GPS, Furuno plotter, Acer computer with Nobeltec navigation software, JRC sounder and ComNav 1001 autopilot. Asking $160,000.
$700,000
thumbnail SE14-008  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1969    Length: 58    Hull: Steel    Builder: Tressler Boat Co    Location: Alaska
58’x22.6’x8.6’ steel combination vessel, rigged as dragger, tender, longliner, and pot boat, built in 1969 by Tressler. Cat 3406 main w/ appr. 6,000 hrs. Twin Disc 4.5:1 gear. 40 kw Isuzu, 40 kw Cat and 12.5 kw Yanmar gen sets. Packs appr 75,000# with 18 ton IMS RSW system. Electronics include (2) radar, GPS, (2) plotter autopilot, sounder, and more. Comes with 120 pots, 2 trawl winches, net reel, doors, crab block and pot launcher. LLP with good history included. Asking $700,000 for the works.
$275,000
thumbnail SE14-005  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 49    Hull: Fiberglass    Builder: Glas-Fab    Location: Washington
49’x13.6’ fiberglass seiner/crabber built by Glas-Fab in 1978. GM 8V92 NA - 325 hp main with Twin Disc MG-509 2:1 gear. Major overhaul of engine and gear reported in 1999. John Deere PE4045 - 40kw aux installed new in 2013. Aluminum mast, A-frame, and stabilizer poles. Currently rigged for crab with articulating davit and 17” block. Fuel capacity of 1,400 gallons in (4) independent tanks. Electronics include GPS, integrated Furuno radar, sounder, plotter, and auto pilot. Asking $275,000.
$265,000
thumbnail SE14-002  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1981    Length: 47.5    Hull: Fiberglass    Builder: MTS    Location: Alaska
47.5’x13.2’x5.2’ fiberglass seiner built by MTS in 1981. John Deere 6081 375hp main with Twin Disk MG509 3:1 gear. Isuzu 20kw aux. 32,000# in two fish holds with IMS 18 ton RSW. Deck gear includes auto purse, slider, vanging, and picking boom. Electronics include SSB, (2) VHF, Tracfone, sonar, sounder, (2) radar, GPS, and auto pilot. Price reduced to $265,000.
Call for Pricing!
thumbnail SE13-022  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1966    Length: 58    Hull: Steel    Builder: Hydraulic Supply    Location: Alaska
58’x24’x10’ sponsoned combination seiner/crabber/dragger built in 1966 by Hydraulic Supply. In 2009 a new house and other major wiring and engine rebuild performed. Cat 3408 B main rated at 480 hp. Twin Disc gear. John Deere 6081 55kw and Isuzu 35kw generators. 120,000 lbs fish hold capacity. 18 ton IMS system. Electronics include GP 70 and Satellite compass, (2) VHF, SSB, computer, Furuno radar, Furuno sounder, ComNav autopilot, AIS and engine room and deck cameras. Make offer.
$650,000
thumbnail SE13-021  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1972    Length: 58    Hull: Steel    Builder: Yokem    Location: Washington
58'x17'x9' steel seiner, built in 1972. 305 hp GMC 8V71 with recent rebuild, 40 kw GMC 4-71 and 5 kw Kubotoa gen sets. Running take out 8V71 included. Packs appr. 70,000# with 18 ton IMS RSW system (new in 2011). Bulbous bow. Full electronics. FocÒ€ℒsÒ€ℒle recently rebuilt. Vessel is being sold WITH aluminum Alfab seine skiff w/ newer 6V53 and new s.s. dry exhaust, 4.25 strip Southeast seine, and all related equipment. Asking $650,000.
$1,450,000
thumbnail SE13-016  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 57.9    Hull: Steel    Builder: Union Bay Boat Works    Location: Alaska
57.9’x27’x10’ steel longliner that can easily be converted to seining, crabbing and pot cod. Originally built in 1979 and extensively rebuilt in 2007, including a bulbous bow and sponsons. Cummins KTA 19-M3 main rated at 640 hp. John Deere 50 kw and John Deere 27 kw generators. Teknotherm RSW. 95,000 lbs capacity in two fish holds. Full aluminum shelter deck, Marco autobaiter, and a JK Fab hydraulic longline block with new Dyrkorm 11.5mm longline gear (20,000 hooks). Stainless hydraulic plumbing. Extensive electronics package including satellite compass, NavNet navigation system, Nobeltec navigation software, Furuno color video sounder and ECC Globe terrain building software. Top of the line vessel with numerous upgrades and recent shipyard work. Includes two LLP for CG HAL, WG HAL-Pot, BS and AI. Asking $1,450,000.
$2,680,000
thumbnail featured listing SE13-010  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1991    Length: 58    Hull: Fiberglass    Builder: Delta    Location: Washington
Exceptionally clean 58’ β€œwide body” Delta built in 1991. Can be rigged for seining, dragging and pot fishing. Cat 3412 main rated at 650 hp. Twin Disc 517 gear. 5 blade propellor. Bulbous bow with bow thruster. Cat 3304B 50kw generator with double hydraulic pump. Isuzu 4BG1 35kw generator. 30 hp carrier RSW system. 165,000 capacity in 2 fish holds. Stainless steel tubing hydraulics lines. Stern ramp for trawling with plug insert. Free standing mast, twin picking booms,slider main boom with slider and (2) gilson winches. Electronics package. Asking $2,680,000.
$400,000
thumbnail SE13-008  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 54    Hull: Fiberglass    Builder: Frostad    Location: Canada
54’x18’x7’ fiberglass seiner/longliner built by Frostad in 1979. Cat 3408 man with Twin Disk Gear. Isuzu 6BDIT 135 hp aux. Packs 110,000 lbs. Rigged for seine and longline. Electronics include GPS, VHF, SSB, (2) radar, (2) plotter, auto pilot, and inverter. Asking $400,000.
$25,000
SE12-022  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 39    Hull: Wood    Builder: Hansen    Location: Alaska
39’x13’x3’ wood seiner built by Hansen in 1974. Cat 3208 main with Twin Disk 506 gear. Packs 30k lbs in fiberglass hold. Rigged with (2) PL4 boom winches, deck winch, Marco powerblock and anchor winch. Electronics include SSB, and radar. Asking $25,000.
$600,000
thumbnail SE12-019  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 62    Hull: Aluminum    Builder: Frostad    Location: Washington
62’x18’x7’ aluminum Canadian seiner built by Frostad in 1974. Ad measure certificate completed for legal fishing in the U.S. Cat 3406 main with Twin Disk gear. Isuzu aux for hydraulics and 12 kw Kubota for house power. Packs 134,000 lbs in (3) fish holds. Major shipyard just completed with new net drum, tilt ramp, fish holds, auto pilot, and electronic engine controls. Asking $600,000.
$499,000
thumbnail SE12-014  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1981    Length: 53    Hull: Fiberglass    Builder: Gulf Fiberglass    Location: Alaska
53’x16.1’ fiberglass seiner built by Gulf Fiberglass in 1981. Recently completely refurbished. (2) John Deere 6068 mains with Twin Disc 506 1.97:1 gears. Isuzu 30 kw aux. Packs 50,000 lbs with IMS 12 Ton RSW. 950 gallon fuel and 220 gallon water capacities. Electronics include (2) VHF, radar, (2) GPS, plotter, computer w/navigation, sounder, auto pilot, Trac phone, watch alarm, and AIS. Call for complete survey and list of upgrades. Recently added fish hold capacity and new deck. Price reduced to $499,000.
$2,900,000
thumbnail SE11-004  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2009    Length: 58    Hull: Steel    Builder: US Construction    Location: Washington
58’x24.5’x12’ new construction, Jensen designed, combination vessel built by US Construction Inc. Cat C-18 main rated at 600 hp. Twin Disk 5170 gear. John Deere 6068 100 kw and John Deere 65 kw generators. 16” 60 hp Wesmar bow thruster. 27 ton and 35 ton RSW system with (2) titanium chiller. 180,000# capacity in two tanks. Bait hatch. 8” aluminum boom, (2) picking booms with all Pullmaster winches. Stainless anchor winch. Pilkington 42” deck winch. All Furuno electronics and a ComNav autopilot. Stainless rub rails and stainless plating on port and starboard sides. Aluminum bait shed and wave wall. Possible harvest of 3A halibut available to buyer. Asking $2,900,000.
$1,600,000
thumbnail SE10-016  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 80    Hull: Steel    Builder: Allied    Location: Vancouver
80’x29’x11’ steel seiner/dragger built in 1980 by Allied Shipyard. Cat 3508 rated at 805 hp with low hours. Twin Disc 540 gear. Isuzu 100kw. Daewoo 33kw generator installed in 2003 with low hours. (2) Daewoo auxs drive (2) 50 ton screw compressors. Top of the line RSW system in all 6 fish holds. 2 blast freezers in the 2 main holds and dole plates in 4 additional holds. Isuzu 6 cyl hydraulic auxiliary. Bulbous bow. Rap Hydema #84 trawl winch system 2000, drag net reel, seine drum, tilt stern ramp and deck winch. 117 ton capacity in 6 tanks. Extensive list of top of the line electronics. Opportunity to own a top of the line vessel in excellent condition. The vessel can be brought into U.S. fisheries. Call for complete survey. Asking $1,600,000.
Web Design, 3 Crown Creative