Vessels 1 - 24 of 24
55'x16.9'x7' fiberglass combination vessel rigged as tender. Little Hoquiam hull, finished by Blake's Custom Boats in 1989. Lugger 6140A rated at 600 hp. Twin Disc gear w/ 2:1 ratio. 55 kw John Deere Tier III genset, new in 2014. Chills 72,000 lbs salmon w/ 30 ton RSW system in (1) fish hold. Tico knuckle boom crane w/ PL4 winch. (2) digital platform scales. Electronics include GPS, VHF, radar, sounder, and autopilot. Asking $295,000.
Builder: Master Marine
81'x22'x11' steel tender, built in 1979 by Master Marine. Twin 402 hp Cat 3408 mains, Cat 3116 and Detroit 471 gen sets. Packs approximately 200,000# in RSW w/ (2) 18 ton RSW compressors and 20 ton chiller. Main boom and (2) picking booms. Electronics include radar, ComNav autopilot, Furuno sounder, (2) VHF, and (2) new computers. Asking $675,000.
Builder: E.W. Heath
70'x16'x6.5' classic tender built in Seattle by E.W. Heath. Currently rigged for trawl and shrimp. Single screw CAT main, 1,300 hours since 2012 rebuild. Twin Disc MG514 w/ 3:1 ratio. Newmar 32-volt to 12-volt 25 amp converter. Electronics include (2) GPS, VHF, Furuno radar and sounder, and Wood Freeman autopilot. Trawl doors and winches. Permits include OR shrimp, and OR salmon troll. Asking $99,500.
101'x24'x9' steel tender, built in 1977 by Burton. Twin 350 hp Cummins QSM 11 mains w/ Twin Disc MF 514 gears. Starboard gear rebuilt in 2014. 80 kw 6BTA and 50 kw 4BTA Cummins gen sets. Packs 200,000 pounds in fiberglassed fish holds. Recently updated RSW system w/ (2) 25 ton IMS chillers and 2 compressors. Approx. 17,700 gallons fuel capacity and 4,900 gallons fresh water. Electronics include GPS, (3) VHFs, SSB, Furuno radar, plotter, autopilot, and more. (5) staterooms w/ 8 berths total and (2) heads w/ shower. 8 person life raft. Call for a survey. Asking $475,000.
Builder: US Navy
69'x16'x4' shallow draft aluminum house back tender, hull built be US Navy in 1994, rebuilt and converted to tender in 2015. Twin Cummins 6BTA 315 hp mains w/ Konrad outdrives. 45 kw Bollard and 20 kw Kubota gen sets. Cold Sea 30 ton RSW system. Packs 70,000# of fish. Long boom w/ PL5, topping lift, and hydraulic vanging. Electronics include (2) plotters, (3) VHF, radar, computer, autopilot and more. Asking $425,000
58'x16.5'x7.6' wood tender/crabber, built in 1964 by Hansen. 290 hp Detroit 8V71 main w/ appr 8,000 hrs on complete overhaul. New 25 kw Isuzu genset. 15 ton RSW system, packs 52,000 pounds in tanked fish hold. Hull recently recaulked. (2) picking booms w/ PL8 winches. 17" crab block. Electronics include (2) VHF, radar, color sounder, ComNav pilot, and more. Asking $225,000.
Builder: Maritime Shipyards
86'x26' wood shallow draft power scow, built in 1942 by Maritime Shipyards. Over $700,000 spent in repairs in 2012 including new aluminum mast, planking replaced, new steel deck, repaired fish tanks, and more. Upgrades include rebuilt roof, Blue Sealed fish holds, rebuilt fish pump and much more. Twin 275 hp Cat 3406 mains, (2) Cat 3306 150 kw gen sets, Isuzu 20 kw gen set. Packs 200,000# in 4 holds w/ 50 ton ammonia RSW system. Full electronics. Excellent condition. Call or email for survey and list of improvements. Asking $650,000.
58'x19.5' Delta combination seiner/pots/tender/longliner built in 1990. Complete refit in 2007 from mast to keel. Lugger 6140 w/ 550 hp and ZF M350 gear with 4.58:1 ratio. (2) John Deere 4045 65 kW auxiliaries. IMS 30 ton RSW system. Packs approximately 95k lbs with RSW and 25k lbs without RSW. Bulbous bow and extended rolling chocks by Delta. Double picking booms, Pilkington purse line davits, self-pursing winch, Marco 28" block w/ gripper and swivel. Full electronics package with Trac phone, (3) 19" monitors interfaced with radar, plotter, sounder and Thorium monitoring system. Full galley with washer and dryer. Also includes 19.5' Rozema skiff w/ nozzle and John Deere 6081. Asking $1,400,000.
Builder: Weldit Tank
86'x24' steel power scow tender, built in 1949. Twin Cat 3406T mains rated at 275 hp ea. 200 kw GMC 8V71, 100 kw GMC 6-71, and Isuzu 20 kw gen sets. Packs 180,000# in RSW w/ (2) Vilters ammonia compressors, (2) 2" condenser cooling pumps, and (2) 6" circulation pumps. Two deck cranes. Full tendering setup with Transvac fish pump, dewatering box, and more. Electronics include VHF, SSB, radar, sounder, AIS monitor, and auto pilot. Major shipyard completed in 2012. Very good condition. Excellent contract may be available. Asking $650,000.
103'x24'x12' ex-crabber, set up for charter. Built in 1980 by Bender for US Navy, very heavily built hull. Extended house. (5) staterooms with 16 berths. Nicely finished with new interior work. Cat C32 main rated at 750 hp, new in 2012, only 2,000 hrs. Cat 3306 155 kw and Cat 3306 200 kw gen sets. 35,000 gph pump on deck. Fish hold capable of packing approximately 250,000#. Recent survey available. Must sell, asking only $300,000.
Builder: Union Bay Boat Works
57.9'x27'x10' steel longliner that can easily be converted to seining, crabbing and pot cod. Originally built in 1979 and extensively rebuilt in 2007, including a bulbous bow and sponsons. Cummins KTA 19-M3 main rated at 640 hp. John Deere 50 kw and 27 kw generators. Teknotherm RSW. 95,000 lbs capacity in two fish holds. Full aluminum shelter deck, Marco autobaiter. Stainless hydraulic plumbing. Captains stateroom w/full head on bridge. Full shop and bait freezer in pilot house sponsons. Extensive electronics package including satellite compass, NavNet navigation system, Nobeltec navigation software, Furuno color video sounder and ECC Globe terrain building software. Top of the line vessel with numerous upgrades and recent shipyard work. Asking $1,075,000 for boat alone. WG pot, CG HAL, BS, and AI LLPs available at market value.
Builder: Nichols Bros
66'x17.2'x8.7' steel crabber/albacore boat. Built in 1974, stretched in 1981. John Deere 6081 main rated at 330 hp. Deere 75 kw and 40 kw gen sets. Spray brine and blast refrigeration systems. Electronics include SSB, VHF, (2) radar, autopilot, sounder, plotter, and more. Comes WITH 450 pot CA crab and 300 pot OR crab permits. Asking $1,000,000 for boat and permits. 500 pot WA permit available. Call for survey.
Builder: Berg Shipyard
78'x22.6'x11' steel longliner, built in 1975 by Berg. Rigged for tendering, longline and pots. GMC 12V149 main rated at 725 hp. 60 kw GMC 671 and 55 kw Northern Lights gen sets. Packs appr. 150,000# with 30 ton RSW system (new compressor and titanium chiller). Deck gear includes 6000# knuckle crane (rebuilt 2015), hauler, launcher, bait chopper, and bait shed. Full tendering setup w/ Ryco fish pump, dewatering and weigh box, and new 1,000 gallon gas tank. Transom cut-out good for longlining black cod pots. Full electronics w/ (2) radar, computer w/ Nobetec, SSB, VHF, and much more. Fully equipped boat. Eager seller, price reduced to $775,000. Turn key, ready to fish. CG pot LLP available to buyer. Call for survey and details.
Builder: General Ship Corp.
134.9'x33.8'x5' LCU built by General Ship in 1974, to military specifications, for heavy equipment transport. Current ABS cert. Twin Detroit 12V71 450 hp mains with low hours. Twin Disc 514 4.5:1 gears. (2) 40 kw aux. Bow and stern ramps. Draft of 3'6" light and 6'10" max load. Cargo length of 105'. Asking $600,000.
Builder: Maritime Shipyards
86'x26.6' powerscow built by Maritime in 1943. Twin CAT 3408 mains with Twin Disk 514 3.5:1 gears. John Deere 6076 150 kw aux. and Isuzu 4BDIT 50 kw aux. Packs 168,000 lbs in fiberglassed hold. (2) 30 ton RSW systems. Complete tender package with 10" Marco herring pump, 10" Ryan transvac pump, and (2) Olympic cranes. Full compliment of safety equipment. Electronics includes (2) GPS, VHF, SSB, radar, plotter, and auto pilot. Reduced to $250,000.
Builder: Burton Shipyard
125'x26.6'x6.7' steel tender built by Burton Shipyard in 1963. Twin Detroit 12-71 mains rated 350 hp ea. Twin Disc 514 gears. 6-71 160 kw and 4-71 60 kw generators. 300,000 pound capacity in 2 fish holds. (2) 30 ton RSW systems. Rowe hydraulic anchor winch, (2) Aurora cranes, 10" Transvac fish pump, sorting table, herring pump and fish handling equipment. Electronics include Furuno radar, GPS, Nobeltech navigation software, satellite phone and (2) VHF. Asking $600,000.
Location: British Columbia
64'x18'x8' (6' stern extension can be easily modified to 58') fiberglass tender built in 1970 by Goldrupp. Cat 334 main rated at 240 hp. Twin Disc gear. 8 knot cruise, 10 knot WOT. Perkins aux. 120,000 pounds capacity with 30 ton RSW.Transvac pump, dewatering, grading equipment and Hiab crane. Electronics include Sat compass, 2 VHF, computer with Nobeltech navigation software, Furuno radar, sounder,ComNav autopilot and 1800 wattt inverter. Asking $475,000.
Builder: Geo W Knesas Co
83'x20'x11' tender, built in 1943 by Geo W Knesas Co. 12V71 main rated at 425 hp. Twin Disc 514 gear. (2) 4-71 75kw generators. 130,000 ponds capacity. 30 tons RSW with new compressor, circ pump and piping. 3 booms, 4 winches, fish pump with recently rebuilt ring pump, weighting system with (2) hoppers that are air controlled. Electronics include SEA 222 sideband, Icom, standard VHF, Furuno GPS, new Furuno radar, new sounder, Ross sounder, Dell computer with Nobeltec chart plotting software and a Sperry autopilot. Many recent upgrades. Call for a full list and survey. Possible contract available. Reduced to $350,000 OBO.
Builder: Kodiak Marine Construction
58'x24'x8' combination seiner/crabber/tender built in 2010 by Kodiak Marine Construction. Twin John Deere mains rated at 325 hp each. ZF gears. Wesmar bow thruster. IMS 18 ton RSW system chills 150,000 lbs. 2,400 gallons fuel capacity. Seine gear includes a Kolstrand power block w/ gripper and deck winch w/ pursing shives. Free standing mast, (2) port and starboard mounted cranes, main boom. Electronics include Furuno multifunction unit, (radar, GPS,depth sounder, plotter), ASU laptop with Captains software, Wesmar sonar, Furuno color sounder, (2) VHF, Satellite phone and WH autopilot. Reduced to $790,000.
Builder: Halls Mill
89'x22.4'x11.2' combination vessel in 1979, but completely rebuilt including 60% hull re-plating. Cat 3412 main rated at 600 hp, recently rebuilt with only 600 hours. Cummins 100 kw with 163 hours, Cummins 80 kw with 2.9 hours and Isuzu 12.5 kw generator. 3,500 cubic ft. fish hold. Complete refrigeration package with two screw compressor. All new safety gear. Electronics include GPS, VHF, Furuno radar, plotter and autopilot. Has 5 staterooms with 10 berths. $375,000.
65'x24'x4.7' steel flat decked tender/power scow, twin Detroit 6-71NA 180 hp mains with Twin disc 509 3:1 gears, 36kw Isuzu genset. Deck crane and anchor winch. Electronics include SSB, CB, (2) VHF, radar, sounder, GPS, and plotter. Also includes (2) spare 6-71 mains and a Northstar Model 10 ice machine, does 5 tons a day. Price reduced to $185,000.
Builder: Maritime Shipyard
73'x24'x6' wood power scow built by Maritime Shipyard in 1940. 43Ã¢â‚¬â„¢x20Ã¢â‚¬â„¢, open penned, plated deck. Two 44Ã¢â‚¬â„¢ cargo booms with 6P15 winches installed new in 2013. Twin GM671 mains with Twin Disk 509 gears. 100% yellow cedar construction. Deck tanks available. Electronics include GPS, (2) VHF, radar, sounder, and auto pilot. Asking $275,000.
Builder: Manitowoc Shipyard
124'xÃ¢â‚¬â„¢38'x18' factory trawler built in 1970 by Manitowoc Shipyard, rebuilt and sponsoned by Mid Coast Marine in 1996. EMD 12 cylinder main rated at 1,300 hp. Freshly rebuilt Lufkin gear with zero hours. (2) Lugger 250 kw generators. 855 Cummins dedicated hydraulic auxiliary. 41,649 gallons fuel capacity. 7,000 gallons fresh water capacity. 13,733 cubic ft fish hold capacity. 4 reefer compressors, 5 plate freezers, various processing equipment. Yaquina trawl winches, split net reels and North American crane. Full compliment of electronics. Price reduced to $725,000.
160'x36' ex-supply vessel, built in 1967 by Zigler, converted to crab in 1990. Vessel has undergone major steel work, needs completion of refitting. Twin Cat 398 mains rated at 950 hp, partial rebuilds need completion. (2) 500 kw Detroit 16V92 gen sets, (1) 75 kw 4-71 gen set. 13,600 cu ft. freezer holds. 61,000 gal fuel and 28,000 water capacities. Interior needs refitting. Call for details. Asking $950,000.