SE24-006

$675,000
Year:
1989
Length:
53
Hull:
Fiberglass
Builder:
Delta
Location:
Alaska

SE24-006

53’x15.9’x6.2’ fiberglass 1989 Delta combination vessel rigged for troll, longline, and seine fisheries. John Deere FG 6081 main rated at 300 hp. Twin Disc 541C reduction gear. Isuzu 37kw and Northern Lights 5kw gensets, both with low hours. Packs 50,000 lbs in main...

More Details

CO24-001

$500,000
Year:
1977
Length:
63
Hull:
Steel
Builder:
Mackey Marine
Location:
Alaska

CO24-001

63.6’x16.5’x8’ steel, tender/crabber, built by Mackey Marine in 1977. Vessel has been gone through and rebuilt. Cummins 855 main rated at 375 hp w/ low hours. ZF350 reduction gear. isuzu 50 kW and Klassen 20 kW gensets, both w/ low hours. Custom 30-ton RSW w/ stain...

More Details

SE24-001

$1,100,000
Year:
1981
Length:
58
Hull:
Fiberglass
Builder:
Delta
Location:
Alaska

SE24-001

58’x19.5’ fiberglass combination/seiner built By Delta in 1981. Caterpillar 3408 main engine rated at 365 hp. Twin Disc MG54C gear with 4.5:1 ratio. 40 kW John Deere and 25 kW Isuzu gen sets. New exhaust on main in 2019.  4900 gallons fuel capacity. Packs...

More Details

LL24-001

$850,000
Year:
1974
Length:
68
Hull:
Steel
Builder:
Peterson Boat Building
Location:
Alaska

LL24-001

68’x21’x7’ steel combination longline/tender/pot boat built by Peterson Boat Building in 1974. John Deere 6125AFM75 rated at 400 hp, new in 2008. Twin Disc 516 gear new in 2008. (2) John Deere 6068 100kW gensets w/ updated exhaust. Packs 120k lbs salmon in (2) insula...

More Details

CO21-006

$725,000
Year:
1975
Length:
58
Hull:
Steel
Builder:
Marco
Location:
Washington

CO21-006

58’x18’ steel combination vessel built as a seiner in 1975 by Marco. John Deere 6135AFM main engine rated at 425 hp, new 2013. Twin Disc 514 marine gear with 4.5:1 ratio, rebuilt 2013. Makes 7.5 knots. 3000 gallons fuel capacity in (2) tanks. 50 kW Isuzu 4B61T genset. P...

More Details

CR23-022

$550,000
Year:
1980
Length:
55
Hull:
Steel
Builder:
Van Peer
Location:
California

CR23-022

55’7”x17’x8’ steel combination vessel rigged for crab, longline, and troll. Built by Van Peer in 1980. Detroit 871 main rated at 250 hp w/ Twin Disc 509 gear. John Deere 30kw genset. Fish hold packs 50,000 lbs, and tankable for 25,000 lbs crab w/ bulkhead instert. B...

More Details

CO23-005

$650,000
Year:
1977
Length:
58
Hull:
Steel
Location:
Alaska

CO23-005

58’x22’x8’ steel combination vessel built in 1977 in Moss Landing, CA. Caterpillar 3406B main engine rated at 385 hp. Twin Disc MG514 gear with 4:1 ratio. 60 kW Iveko and 28 kW Kubota gensets. Packs 80k# in (1) insulated fish hold. IMS 18-ton RSW system. Accommod...

More Details

DR23-003

$1,200,000
Year:
1980
Length:
58
Hull:
Steel
Builder:
Peacock
Location:
Alaska

DR23-003

58’x24’x8’ steel combination vessel built by Peacock in 1980. Sponsoned by Wahl. Cummins QSK19 main engine rated at 660 hp. Twin Disc MG-5202 gear with 4.5:1 ratio. 90 kW John Deere 6068 and 25 kW Isuzu gen sets. Packs 140k# salmon. 25 ton IMS RSW system. Deck equ...

More Details

SE23-008

$1,400,000
Year:
1979
Length:
58
Hull:
Fiberglass
Builder:
Delta
Location:
Washington

SE23-008

58’x19.5’x10’ Delta built in 1979, upgraded with big rolling chocks, bulbous bow, 50hp bow thruster, and rigged for seine, longline, and crab. Cummins K19A main w/ ZF gear. John Deere 60kw genset w/ 100 gal auxilliary hydraulics off Pitts clutch and Mitsubishi 20kw ge...

More Details

DR23-002

$650,000
Year:
1980
Length:
65
Hull:
Steel
Builder:
Irving Steel Fabrication
Location:
Oregon

DR23-002

65’x21’x8.5’ steel Gulf shrimper built in 1980 by Irving Steel Fab. Rebuilt CAT 3408 rated at 400 hp w/ Twin Disc 514C gear. Kabota V2203 20kW genset. Rigged for crab, shrimp and ground fish. Recent work completed at Giddings Boat Works includes rebuilt main, new ou...

More Details

TR23-013

$55,000
Year:
1976
Length:
34
Hull:
Fiberglass
Location:
Oregon

TR23-013

34’x11.5’x4.5’ fiberglass troller/crabber built in 1976. CAT 3208 main rated at 210 hp w/ 4,700 hours. Twin Disc gear w/ 1.97:1 ratio. Fuel capacity of 450 gallons in (3) tanks. Insulated tank insert packs 8,000 lbs. Deck equipment includes (4) single-spool gurdies...

More Details

LL23-001

$615,000
Year:
1979
Length:
66
Hull:
Steel
Builder:
Howard Maki
Location:
Alaska

LL23-001

66’x19’x8’ steel combination vessel rigged for longline, crab, and tendering. Built in 1979 by Howard Maki. 500 hp Cummins KTA19 main w/ Twin Disc 516 gear. (2) John Deere 40kW gensets, one newly installed. (2) 35/25 gpm Vickers hydro pumps. Cold Sea 26-ton RSW system....

More Details

CO23-004

$3,500,000
Year:
1999
Length:
85
Hull:
Steel
Builder:
Fred Wahl
Location:
Oregon

CO23-004

85’x26’x12’ steel combination vessel built by Fred Wahl in 1999, and rigged for crab, longline/pots, and albacore. Cummins QSK19-M3 main rated at 750 hp, and Twin Disc 5052 gear. Auxiliary engines include 150kw John Deere 6068, 100kw John Deere 4045, and 25kw Isuzu....

More Details

CO23-003

$775,000
Year:
1964
Length:
84
Hull:
Steel
Builder:
American Marine
Location:
Alaska

CO23-003

84’x33’x10.5’ steel combination vessel, currently set up as a tender. Twin Cummins QSM11455 main engines rated at 450 hp, installed in 2022. Twin Disc 514C gears with 3.5:1 ratio. 170 kW Daewoo, 150 kW GMC 8V71T, and 40 kw Isuzu gensets. Packs 250k# in (3) fish hold...

More Details

CR23-013

$550,000
Year:
1966
Length:
58
Hull:
Steel
Builder:
Martinolich
Location:
Alaska

CR23-013

59’x17’x7’ steel crabber built by Martinolich in 1966. Caterpillar D343 main engine makes 400 hp, 1500 hours on rebuild. Twin Disc MG514 gear with 4.5:1 ratio. Makes 7 knots. (2) 20 kW Northern lights gen sets. 2,250 gallons fuel capacity in (3) tanks. Packs 50k#...

More Details

CR23-010

$300,000
Year:
2017
Length:
47
Hull:
Fiberglass
Builder:
Custom
Location:
California

CR23-010

47’x15’x5.5’ custom built lobster boat. Keel laid by Long Beach Boatyard (CAN) in 2005, owner completed in 2017. Twin John Deere 8.1 mains rated at 380 hp each, both w/ low hours. ZF 280-1A gears. Isuzu 15kw genset. Fuel capacity of 1,000 gallons. Packs an estimated...

More Details

CO23-002

$675,000
Year:
1993
Length:
36
Hull:
Fiberglass
Builder:
Nuwave
Location:
California

CO23-002

36’x12’x3’ fiberglass combination vessel, rigged as a crabber and squid light boat, built by Nuwave in 1993. CA brail squid permit included. Twin Tier 3 Cummins QSC 8.3 main engines, installed new in 2016, make 500 hp each. ZF286 marine gear. Makes (31) knots. 800...

More Details

DR23-001

$1,300,000
Year:
1980
Length:
80
Hull:
Steel
Builder:
Allied
Location:
BC

DR23-001

80’x29’x11’ steel dragger/combination vessel built in 1980 by Allied Shipyard, overhauled in 2001. Cat 3508 main engine rated at 805 hp. Twin Disc 540 gear. Makes 9 knots. Isuzu rated at 350 hp drives hydraulics. 100 kW Isuzu and 33 kW Daewoo gen sets. (2) 88 hp D...

More Details

CR23-009

$330,000
Year:
1986
Length:
53
Hull:
Fiberglass
Builder:
Beck/LeClerq
Location:
Alaska

CR23-009

53’x15’x3.5’ fiberglass Beck/LeClerq combination vessel, built in 1986. Currently rigged as a crabber. Lugger 6125 main engine rated at 410 hp. Makes 7.5 knots at 9 gph. Twin Disc 509TD gear with 2:1 ratio. 30 kW Isuzu gen set. Packs 20k# crab,40# of salmon in (1)...

More Details

CO23-001

$200,000
Year:
1967
Length:
39
Hull:
Fiberglass
Builder:
Thermodyne
Location:
California

CO23-001

38.7’x13.8’ fiberglass combination crab/troller/seiner built by Thermodyne in 1967. Aluminum top house w/ Lexan windows. Detroit 8V-71 main w/ Twin Disc 509 gear. Northern Lights 9kW genset. Hydraulic driven 7.5 ton RSW system. Insulated fish hold divided into (3)...

More Details

CR23-001

$375,000
Year:
1967
Length:
53
Hull:
Steel
Builder:
Wilwerding
Location:
California

CR23-001

53.1’x14.7’x8’ steel crabber/troller combo vessel, built in 1967 by Wilwerding. 250 hp Cummins 855 main w/ Twin Disc 509 gear. Isuzu C240 20kw genset. Fuel capacity of 2,600 gallons in (3) tanks. Fish hold packs 20 tons tuna, and has 10k lb crab tank insert. Spray...

More Details

SP22-001

$295,000
Year:
1989
Length:
40
Hull:
Fiberglass
Builder:
Lindell
Location:
Alaska

SP22-001

40’x14’ fiberglass sternpicker set up to crab and gillnet. Built by Lindell in 1989. Komatsu by Lugger main, rated at 440 hp w/ Twin Disc 509 gear. Northern Lights Lugger M673L3.3 w/ 7.5 kW genset. IMS RSW system. Packs 18k lbs in (6) insulated fish holds. Sliding...

More Details

DR22-005

$200,000
Year:
1965
Length:
68
Hull:
Wood
Builder:
Toche
Location:
Oregon

DR22-005

68’x20’x8’ wood shrimp trawler w/ permits, built by Toche Boats in 1965. 855 Cummins main rated at 325 hp, w/ Twin Disc 509 gear. Isuzu 4JB1 30kw genset. Fuel capacity of 2,800 gallons in (4) tanks. Fish hold capacity of 50,000 lbs shrimp. Deck equipment includes h...

More Details

CO22-007

$225,000
Year:
1980
Length:
50
Hull:
Steel
Builder:
Troyer
Location:
Alaska

CO22-007

50’x22’ steel combination vessel built in 1980 by Troyer. Lengthened and sponsoned in 2017-18. John Deere 6090 main engine rated at 315 hp. Twin Disc 5109 gear with 3:1 ratio. 22 kW Kubota gen set, 1k hours. Packs 23k# halibut, 35k# cod, iced. Compressor, 10-ton un...

More Details

LL22-004

$850,000
Year:
1975
Length:
78
Hull:
Steel
Builder:
Berg Shipyard
Location:
Alaska

LL22-004

78’x22.6’x11’ steel combination built by Berg in 1975. Rigged for tendering, longline and pots. GMC 12-V149 main rated at 725 hp. GMC 671 90 kW and Lugger 55 kW gensets. Packs 168,000 lbs cod in (2) insulated fish holds. 30 ton RSW system w/ new compressor, (2) cir...

More Details

CO22-006

$950,000
Year:
1974
Length:
58
Hull:
Steel
Builder:
Marco
Location:
Alaska

CO22-006

58’x18.3’x9.3’ steel combination vessel rigged for pots, longline and tendering. Built by Marco in 1974. Cummins KT-19-M rated at 425 hp w/ Twin Disc 514 reduction gear. John Deere 4045 w/ 55kW and Sahabu w/ 22kW gensets. Packs 98k lbs in (2) insulated fish holds....

More Details

CO22-005

$850,000
Year:
1997
Length:
58
Hull:
Steel
Builder:
Vern Eggleston
Location:
Oregon

CO22-005

58’x24’x8’ sponsoned steel combination vessel, rigged for crab, albacore, and squid, built in 1997 by Vern Eggleston. New Cummins 855 main rated at 425 hp,w/ low hours. ZF 350 gear. John Deere 30kw genset and Isuzu 40kw genset w/ PTO hydros. Fuel capacity of 5,400 ga...

More Details

CR22-013

$245,000
Year:
1978
Length:
48
Hull:
Steel
Builder:
Troyer St. Clair
Location:
Alaska

CR22-013

48’x14’x7.7’ steel crabber, Troyer design, built by St. Clair in 1978. Isuzu UM6Hk1 rated at 350 hp w/ Twin Disc 509 gear. Isuzu 20kW genset. (2) insulated fish holds pack approx. 40k lbs salmon. Recent work includes blasted/painted hull, lazerette, boom and new wat...

More Details

CO22-003

$575,000
Year:
1975
Length:
55
Hull:
Steel
Builder:
Ross & Bohn
Location:
Oregon

CO22-003

55’x15.5’x6.5’ steel combination vessel rigged for crab, salmon, tuna, and built by Ross and Bohn in 1975. Cummins QSL9 main rated at 285 hp, w/ Twin Disc 509 gear. 32kw Onan genset. 3,200 gallon fuel capacity in (6) tanks. Packs 14k lbs crab, or 18 tons albacore in...

More Details

CR22-011

$625,000
Year:
1979
Length:
55
Hull:
Steel
Builder:
Giddings/Warren
Location:
Oregon

CR22-011

55’x16.6’x6.2’ steel combination vessel package, built by Giddings in 1976. 550 hp Cummins NTA-855M main w/ Twin Disc 514 gear. 30kW Isuzu genset, new in 2015. (3) hydraulic pumps. Packs 50,000# in insulated fish hold. Spray brine RSW system w/ 12-ton Carrier compr...

More Details

Sign up for email updates