- Year:
- 1989
- Length:
- 53
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- Alaska
53’x15.9’x6.2’ fiberglass 1989 Delta combination vessel rigged for troll, longline, and seine fisheries. John Deere FG 6081 main rated at 300 hp. Twin Disc 541C reduction gear. Isuzu 37kw and Northern Lights 5kw gensets, both with low hours. Packs 50,000 lbs in main...
More Details- Year:
- 1977
- Length:
- 63
- Hull:
- Steel
- Builder:
- Mackey Marine
- Location:
- Alaska
63.6’x16.5’x8’ steel, tender/crabber, built by Mackey Marine in 1977. Vessel has been gone through and rebuilt. Cummins 855 main rated at 375 hp w/ low hours. ZF350 reduction gear. isuzu 50 kW and Klassen 20 kW gensets, both w/ low hours. Custom 30-ton RSW w/ stain...
More Details- Year:
- 1979
- Length:
- 53
- Hull:
- Fiberglass
- Builder:
- Delta Marine
- Location:
- Alaska
53’x15.6’x7’ Delta Marine combination vessel built in 1979, rigged for seine, longline, crab, and jig fisheries. Detriot 60 series main rated at 450 hp w/ Twin Disc gear. Isuzu 35kw genset. Fuel capacity of 2,200 gallons in (4) tanks. IMS 18-ton RSW system. Packs 4...
More Details- Year:
- 1979
- Length:
- 107
- Hull:
- Steel
- Builder:
- Bender Shipbuilding
- Location:
- Alaska
107’x30’x11’ steel aft-house crabber built in 1979 by Bender. Twin Caterpillar D3412 main engines rated at 624 hp each. Twin Disc MG-520 gears. Twin 225 kW Caterpillar 3406B gensets. 33k gallons fuel capacity. Packs 120k# king crab, 165k# opilio, 330k# sockeye. (2)...
More Details- Year:
- 1978
- Length:
- 90
- Hull:
- Steel
- Builder:
- Dakota Creek Industries
- Location:
- Washington
90’x27’x8’ steel tender vessel built by Dakota Creek in 1978. Twin Volvo TAMD 120AK each rated at 350 hp. Twin Disc MG514 w/ 4.5:1 gear ratio. John Deere 6076 w/150 kW and JD 6068 w/100 kW gensets w/ additional Mitsubishi 40 kW hotel genset. Packs 220k lbs in (2) st...
More Details- Year:
- 1981
- Length:
- 58
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- Alaska
58’x19.5’ fiberglass combination/seiner built By Delta in 1981. Caterpillar 3408 main engine rated at 365 hp. Twin Disc MG54C gear with 4.5:1 ratio. 40 kW John Deere and 25 kW Isuzu gen sets. New exhaust on main in 2019. 4900 gallons fuel capacity. Packs...
More Details- Year:
- 2006
- Length:
- 30
- Hull:
- Aluminum
- Builder:
- Western Fab
- Location:
- Washington
28’x10.5’x1.5’ aluminum crabber built by Western Fab in 2006. Twin Honda BF225A outboards make 225 hp each, new in 2021. (2) 100 gallon fuel tanks. Makes 34 knots light. Packs 1,500# crab in (1) hold, 2k# on deck in totes. Configured for crab with davit, hauler, dum...
More Details- Year:
- 1974
- Length:
- 68
- Hull:
- Steel
- Builder:
- Peterson Boat Building
- Location:
- Alaska
68’x21’x7’ steel combination longline/tender/pot boat built by Peterson Boat Building in 1974. John Deere 6125AFM75 rated at 400 hp, new in 2008. Twin Disc 516 gear new in 2008. (2) John Deere 6068 100kW gensets w/ updated exhaust. Packs 120k lbs salmon in (2) insula...
More Details- Year:
- 1976
- Length:
- 45
- Hull:
- Aluminum
- Builder:
- Freeman-Howard
- Location:
- California
45’x13.7’x7.2’ aluminum combination vessel rigged for crab and salmon, built by Freeman-Howard in 1976. Detroit 871 main rated at 310 hp w/ Twin Disc 509 gear. Isuzu 10kw genset. Fuel capacity of 2,000 gallons in (2) tanks. Single tanked/insulated fish hold packs 12...
More Details- Year:
- 1965
- Length:
- 33
- Hull:
- Fiberglass
- Builder:
- Owens
- Location:
- California
33.3’x11.5’x4’ fiberglass crabber built by Owens in 1965. Volvo Penta turbo diesel rated at 200hp, w/ dual prop outdrive. Fuel capacity of 200 gallons. Packs 2,500 lbs in (2) floodable holds, and 1,500 lbs on deck. Vessel holds (50) 38” crab pots on deck. Aluminum...
More Details- Year:
- 1973
- Length:
- 114
- Hull:
- Steel
- Builder:
- Fairhaven Shipyard
- Location:
- Alaska
114’x30’x11’ steel, single-crew crabber/tender built at Fairhaven Shipyard in 1973. Caterpillar 3512DI main engine rated at 1207 hp. Caterpillar 7261 gear with 3.84:1 ratio. Cruises at 10 knots. 180 kW Caterpillar 3306 and 190 kW Caterpillar 3306 gen sets. 40,000 g...
More Details- Year:
- 1985
- Length:
- 36
- Hull:
- Fiberglass
- Location:
- California
36’x12’x4.5’ fiberglass crabber/troller built in 1985. Cummins 6BTA 5.9 main rated at 315 hp. ZF Hurth gear. 150 gallon fuel capacity. Portable Honda 2kw generator. Deck equipment includes Junes crab block, davit, and outriggers. Single fish hold with raised hatch...
More Details- Year:
- 1975
- Length:
- 58
- Hull:
- Steel
- Builder:
- Marco
- Location:
- Washington
58’x18’ steel combination vessel built as a seiner in 1975 by Marco. John Deere 6135AFM main engine rated at 425 hp, new 2013. Twin Disc 514 marine gear with 4.5:1 ratio, rebuilt 2013. Makes 7.5 knots. 3000 gallons fuel capacity in (2) tanks. 50 kW Isuzu 4B61T genset. P...
More Details- Year:
- 1980
- Length:
- 55
- Hull:
- Steel
- Builder:
- Van Peer
- Location:
- California
55’7”x17’x8’ steel combination vessel rigged for crab, longline, and troll. Built by Van Peer in 1980. Detroit 871 main rated at 250 hp w/ Twin Disc 509 gear. John Deere 30kw genset. Fish hold packs 50,000 lbs, and tankable for 25,000 lbs crab w/ bulkhead instert. B...
More Details- Year:
- 1977
- Length:
- 58
- Hull:
- Steel
- Location:
- Alaska
58’x22’x8’ steel combination vessel built in 1977 in Moss Landing, CA. Caterpillar 3406B main engine rated at 385 hp. Twin Disc MG514 gear with 4:1 ratio. 60 kW Iveko and 28 kW Kubota gensets. Packs 80k# in (1) insulated fish hold. IMS 18-ton RSW system. Accommod...
More Details- Year:
- 1949
- Length:
- 126
- Hull:
- Steel
- Builder:
- FB Walker and Sons, Inc.
- Location:
- Washington
126’x30’x12’ steel house-aft crabber/tender vessel built in 1949 by FB Walker and Sons, Inc. Twin Caterpillar 3408 DI main engines rated at 365 hp each. Twin Disc MG514 gears with 6:1 ratio. Twin 180 kW Caterpillar 3306 TA and (1) 40 kW John Deer 4045DFM70 gensets. P...
More Details- Year:
- 1973
- Length:
- 100
- Hull:
- Steel
- Builder:
- Toche Enterprises, Inc.
- Location:
- Washington
100’x25’x12’ steel, tender/crabber built by Toche Enterprises Inc in 1973. Converted to a Bering Sea crabber and lengthened 10’ in 1975. Detroit 16V71 rated at 480 hp w/ Capitol HPC10500 gear w/ 6:1 ratio. (2) Detroit 671 135 kW and Yanmar 45 kW. Packs 210k lbs salm...
More Details- Year:
- 1979
- Length:
- 58
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- Washington
58’x19.5’x10’ Delta built in 1979, upgraded with big rolling chocks, bulbous bow, 50hp bow thruster, and rigged for seine, longline, and crab. Cummins K19A main w/ ZF gear. John Deere 60kw genset w/ 100 gal auxilliary hydraulics off Pitts clutch and Mitsubishi 20kw ge...
More Details- Year:
- 1964
- Length:
- 56
- Hull:
- Steel
- Builder:
- JM Martinac
- Location:
- Washington
56’x17’x8’ steel longliner/crabber built in 1964 by JM Martinac. John Deere 6125AFM75 main engine rated at 340 hp. Twin Disc MG516 gear with 4.5:1 ratio. 65 kW John Deere 4045TF genset. 2,800 gallons fuel capacity. Nshaft and bearings in 2022. Packs 65,000 salmon...
More Details- Year:
- 1980
- Length:
- 65
- Hull:
- Steel
- Builder:
- Irving Steel Fabrication
- Location:
- Oregon
65’x21’x8.5’ steel Gulf shrimper built in 1980 by Irving Steel Fab. Rebuilt CAT 3408 rated at 400 hp w/ Twin Disc 514C gear. Kabota V2203 20kW genset. Rigged for crab, shrimp and ground fish. Recent work completed at Giddings Boat Works includes rebuilt main, new ou...
More Details- Year:
- 1970
- Length:
- 38
- Hull:
- Wood
- Location:
- Oregon
38’x11.4’x5’ wooden troller/crabber built in 1970 in Longview, WA. Perkins 6354 rated at 140 hp w/ Capitol gear. PTO connected with Pitts Clutch connected to 36 GPM hydraulic pump. Kolstrand (3) spool salmon gurdies, Junes crab block, trolling cockpit and anchor winc...
More Details- Year:
- 2018
- Length:
- 39
- Hull:
- Aluminum
- Builder:
- North River
- Location:
- Alaska
39’x10.5’ aluminum, North River Offshore, Voyager 3300, built in 2018. Rigged to pot fish and charter. Twin Suzuki DF350A 3500IF each rated at 350 hp installed June 2023. Suzuki DFATL2 40 hp kicker. Honda 20 hp engine powers hydraulic PTO. (3) integrated fish holds...
More Details- Year:
- 1974
- Length:
- 42
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- California
42’x13.9’x6’ fiberglass Delta built in 1974, rigged for spot prawns, salmon, and as a squid light boat. Volvo D-12 main rated at 450 hp. Twin Disc gear w/ 2:1 ratio. Kubota 18kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Fish hold packs 14 tons. Deck equi...
More Details- Year:
- 1976
- Length:
- 34
- Hull:
- Fiberglass
- Location:
- Oregon
34’x11.5’x4.5’ fiberglass troller/crabber built in 1976. CAT 3208 main rated at 210 hp w/ 4,700 hours. Twin Disc gear w/ 1.97:1 ratio. Fuel capacity of 450 gallons in (3) tanks. Insulated tank insert packs 8,000 lbs. Deck equipment includes (4) single-spool gurdies...
More Details- Year:
- 1970
- Length:
- 41
- Hull:
- Wood
- Location:
- California
41’x15’x5’ wood troller built in 1970 in Longview, WA. Includes CA salmon troll permit and 250 pot CA crab permit. Cummins 290 main engine rated at 180 hp. Twin Disc 509 gear. Burns 5 gph at 7 knots. Packs 4,500# of crab in (1) fish hold with aluminum insert. Deck...
More Details- Year:
- 1963
- Length:
- 51
- Hull:
- Fiberglass
- Builder:
- Rawson
- Location:
- Oregon
51.5’x14’x5’ fiberglass crabber built by Rawson in 1963. John Deere 6068TFM rated at 225 hp. Twin Disc MG5061 with 2.5:1 ratio. 20 kW Isuzu 4LE genset. Packs 8k# crab in forward hold, 4k# iced tuna in aft hold, both insulated. 10 ton spray brine refrigeration syste...
More Details- Year:
- 1981
- Length:
- 56
- Hull:
- Steel
- Location:
- Washington
56’x16’x7’ steel purse seiner, Monk design, built in 1982. Detroit 871 rated at 350 hp w/ 4850 hrs on the rebuild. Perkins auxiliary runs hydraulic RSW system. Packs 75k lbs in (2) insulated fish holds. RSW w/ 18 ton compressor. Marco power block w/ gripper, deck w...
More Details- Year:
- 1979
- Length:
- 66
- Hull:
- Steel
- Builder:
- Howard Maki
- Location:
- Alaska
66’x19’x8’ steel combination vessel rigged for longline, crab, and tendering. Built in 1979 by Howard Maki. 500 hp Cummins KTA19 main w/ Twin Disc 516 gear. (2) John Deere 40kW gensets, one newly installed. (2) 35/25 gpm Vickers hydro pumps. Cold Sea 26-ton RSW system....
More Details- Year:
- 1970
- Length:
- 39
- Hull:
- Aluminum
- Builder:
- Rohd
- Location:
- California
39’x16’ aluminum crabber built in 1970 by Rohd. Twin Detroit mains rated at 425 hp. Packs 6,000 lbs. Electronics include GPS, (2) VHF, Furuno radar, sonar, sounder. New top house, crab tank, Glendinning engine controls, shaft and bearing. Includes a 250 pot California...
More Details- Year:
- 1969
- Length:
- 104
- Hull:
- Steel
- Builder:
- Marco
- Location:
- Washington
104’x25’x12’ steel crabber/tender built by Marco in 1969. Cat D348 main engine rated at 750 hp, Cat gear. (2) Cat 155 kW gen sets. Packs 270,000# salmon in (2) holds. IMS 50 ton RSW system, overhauled 2018. Deck equipment includes an Aurora knuckle crane, pot launc...
More Details