DR23-003

$1,200,000
Year:
1980
Length:
58
Hull:
Steel
Builder:
Peacock
Location:
Alaska

DR23-003

58’x24’x8’ steel combination vessel built by Peacock in 1980. Sponsoned by Wahl. Cummins QSK19 main engine rated at 660 hp. Twin Disc MG-5202 gear with 4.5:1 ratio. 90 kW John Deere 6068 and 25 kW Isuzu gen sets. Packs 140k# salmon. 25 ton IMS RSW system. Deck equ...

More Details

DR23-002

$650,000
Year:
1980
Length:
65
Hull:
Steel
Builder:
Irving Steel Fabrication
Location:
Oregon

DR23-002

65’x21’x8.5’ steel Gulf shrimper built in 1980 by Irving Steel Fab. Rebuilt CAT 3408 rated at 400 hp w/ Twin Disc 514C gear. Kabota V2203 20kW genset. Rigged for crab, shrimp and ground fish. Recent work completed at Giddings Boat Works includes rebuilt main, new ou...

More Details

DR23-001

$1,300,000
Year:
1980
Length:
80
Hull:
Steel
Builder:
Allied
Location:
BC

DR23-001

80’x29’x11’ steel dragger/combination vessel built in 1980 by Allied Shipyard, overhauled in 2001. Cat 3508 main engine rated at 805 hp. Twin Disc 540 gear. Makes 9 knots. Isuzu rated at 350 hp drives hydraulics. 100 kW Isuzu and 33 kW Daewoo gen sets. (2) 88 hp D...

More Details

DR22-005

$200,000
Year:
1965
Length:
68
Hull:
Wood
Builder:
Toche
Location:
Oregon

DR22-005

68’x20’x8’ wood shrimp trawler w/ permits, built by Toche Boats in 1965. 855 Cummins main rated at 325 hp, w/ Twin Disc 509 gear. Isuzu 4JB1 30kw genset. Fuel capacity of 2,800 gallons in (4) tanks. Fish hold capacity of 50,000 lbs shrimp. Deck equipment includes h...

More Details

DR22-004

$1,150,000
Year:
1984
Length:
115
Hull:
Steel
Builder:
Bender Shipbuilding
Location:
Rhode Island

DR22-004

115’x30’ steel trawler built by Bender Shipbuilding in 1984. Caterpillar D35167 main engine rated at 1700 hp. Reintjes WAF870 gear, 6.044:1 ratio. 78”, four-blade, stainless steel prop. 320 kW GMC 12V71, 320 kW GMC 8V92, and 99 kW John Deere gen sets. 15k gallons f...

More Details

DR22-003

$1,000,000
Year:
1981
Length:
112
Hull:
Steel
Builder:
Eastern Shipyards
Location:
Massachusetts

DR22-003

112’x30’ steel trawler built by Eastern Shipyards in 1981. Twin Caterpillar 3412 main engines rated at 725 hp each. Twin Disc MG5222 gears, 5:1 ratio. 61”, four-blade, bronze props. (3) 190 kW Caterpillar 3306 gen sets. Hydraulics for haul back driven by additional...

More Details

DR22-002

$700,000
Year:
1983
Length:
132
Hull:
Steel
Builder:
Bender
Location:
Washington

DR22-002

132’x32’x8’ steel factory trawler built in 1983 by Bender. General Electric 8V228 marine diesel electric main engine rated at 1,753 hp, raw water-cooled. Man B & W Alpha 27V 014 marine gear with 2.68:1 ratio. Cummins KT19 and Cummins KTA 19G2 gen sets make 470 kW eac...

More Details

DR22-001

$135,000
Year:
1976
Length:
32
Hull:
Aluminum
Builder:
Tanaboat Enterprises Ltd.
Location:
Canada

DR22-001

32’x12’ aluminum shrimper built by Tanaboat Enteprises Ltd. in Vancouver, BC, in 1976. Twin Volvo TAMD60 main engines rated at 255 hp. Twin Disc 506 gears with 2.5:1 ratio. Makes 11 knots. 420 gallons fuel capacity in (2) tanks. Yanmar gen set for freezer. Gear in...

More Details

CO19-019

$1,500,000
Year:
1990/2017
Length:
58
Hull:
Steel
Builder:
Martin Allen Design
Location:
Oregon

CO19-019

58’x21'x7.5’ steel combination vessel rigged for crab, shrimp, and tuna.  Martin Allen design built in Moss Landing, then sponsoned and rebuilt by Wahl/Giddings in 2017.  Cummins K19 main rated at 600 hp, new in 2017.  Twin Disc gear.  100kW and 65kW...

More Details

DR21-004

$250,000
Year:
1946
Length:
42
Hull:
Wood
Builder:
John's Boatshop
Location:
California

DR21-004

42’x12.5’x5.6’ wood combination vessel rigged for trawl and salmon troll, built in 1946 at John’s Boatshop, Wilmington, CA. John Deere 6081 main rated at 230 hp and Tonanco gear w/ 3:1 ratio. Cruises at 7.5-8 kts and burns 2.5 gal/hr. Northern Lights 6kw genset. Fis...

More Details

DR21-003

$425,000
Year:
1993
Length:
73
Hull:
Steel
Builder:
Portier
Location:
Oregon

DR21-003

73’x22’x8.3’ steel shrimp trawler built by Portier in 1993, and also rigged for crab and bottom trawling. CAT 3408 main rated at 470 hp, w/ Twin Disc 516c reduction gear. Detroit 371 40kw and Detroit 371 30kw gensets. 11,000 gal fuel capacity in (4) tanks. Packs 60,...

More Details

DR21-001

$300,000
Year:
1979
Length:
76
Hull:
Fiberglass
Builder:
Desco
Location:
California

DR21-001

76’x22’x13’ fiberglass trawler built by Desco in 1979. Cat C32 rated at 750 hp w/ Twin Disc 5:1 ratio reduction gear. John Deere 11.5L hydraulic engine w/(2) 65 gpm hydraulic pumps. John Deere 4-cylinder 50 kW and Perkins 21 kW gensets.  Packs 75 tons in tan...

More Details

DR20-001

$350,000
Year:
1979
Length:
62' 3.5"
Hull:
Steel
Builder:
Monk design, OK Welding
Location:
California

DR20-001

62’3.5"x19’x10’ steel combination vessel rigged for trawl and tuna. Monk design, built by OK Welding in 1979. Cummins KT 1150 main w/ Twin Disc 514 gear. 6-cyl John Deer aux and 40kW Isuzu genset. 6,000 gal fuel capacity in (6) tanks. Blast freeze system, 5F40 comp...

More Details

TE20-002

$650,000
Year:
1992
Length:
98
Hull:
Fiberglass
Builder:
Master Marine, Inc.
Location:
Washington

TE20-002

98’x27.5’x12’ fiberglass combination tender/dragger built by Master Marine, Inc in 1992. Cat 3512 rated at 1750 hp w/ top end rebuild in 2017.  New Reintjes reduction gear, installed 2022. Cat 3408 300 kW and Cat 3306 150 kW gensets. Packs 300k lbs total in...

More Details

RS20-001

$2,000,000
Year:
1990
Length:
186
Hull:
Steel
Builder:
McDermott Shipyards
Location:
Washington

RS20-001

186’x40’ steel oceanographic research/utility vessel built in 1990 by McDermott Shipyards. Cummins KTA50M main engine rated at 1,250 hp. Reintjes gear with 7.053:1 ratio. Ulstein azumith stern drives, 300 hp each, with 3:1 ratio. Bow thruster. (3) Cummins VTA 600 k...

More Details

DR19-010

$600,000
Year:
1979
Length:
124
Hull:
Steel
Builder:
Marine Industries Northwest
Location:
Washington

DR19-010

124’x32’x11’ factory trawler built in 1979 by Marine Industries Northwest. Man B&W Alpha model 10V23LU main engine rated at 1,450 hp. Alpha reduction gear. Twin 250 kW Cat 3406 B gensets. Fully operational factory. Approximately 190mt capacity for finished, frozen...

More Details

DR19-009

$300,000
Year:
1976
Length:
63
Hull:
Steel
Builder:
Mike Brown
Location:
Oregon

DR19-009

63’x17.7’x8’ steel combination vessel, rigged for bottom trawling, built by Mike Brown in Port Hueneme, CA. Isuzu UM6WG main rated at 505 hp and Twin Disc 514 gear. PTO drives (2) 60 gpm pumps. John Deere 40 kW genset w/ Vickers 20 gpm pump. Packs 70,000# iced groun...

More Details

CO18-029

$1,900,000
Year:
1980
Length:
72
Hull:
Steel
Builder:
Duke's Welding
Location:
Oregon

CO18-029

72'x22'x10' steel combination vessel. Monk-design, built by Duke's Welding in 1980. Currently set up as a crabber/shrimper/tuna vessel. Cummins QSK19M main engine rated at 750 hp, installed new in 2015. Twin Disc MCX gear with 5:1 ratio. 100 kW and 50 kW Cummins, 3...

More Details

DR19-002

$200,000
Year:
1976
Length:
71
Hull:
Steel
Builder:
Deep Sea Boat Builders
Location:
California

DR19-002

71’x21’x11’ steel trawler, built 1976 in Bayou La Batre, Alabama. CAT 3408 main rated at 360 hp, w/ Twin Disc reduction gear. Fish hold packs 164,000#. Deck equipment includes (2) hydraulic winches, (2) spare winches, net reel, (4) pairs of doors, and (5) nets rangin...

More Details

RS17-005

$800,000
Year:
1978
Length:
70
Hull:
Steel
Builder:
Nichols Bros
Location:
Alaska

RS17-005

70'x21'x9.5' steel dragger, currently used for research work. Built in 1978 by Nichols Bros. 425 hp Cat 353 main w/ appr. 14K hrs on overhaul. Burns 9 gph @ 8 kts. Twin Disc 4.5:1 gear. Yanmar 36 kW and Kubota 28 kW gen sets. Marco hauler and coiler, Yaquina YB5 t...

More Details

UT16-004

$499,000
Year:
1977
Length:
76
Hull:
Steel
Builder:
Bender
Location:
Alaska

UT16-004

76'x25'x8' steel dragger, converted to ORV/dredge/research boat. Built in 1977 by Bender. Cummnins VTA-1710 main rated at 625 hp, Twin Disc 518 gear. 20 kw Northern Lights and Yanmar 11 kw gen sets, plus a John Deere 6090 drives hydraulically operated dredge. Full e...

More Details

DR15-002

$3,500,000
Year:
1974
Length:
194.5
Hull:
Steel
Builder:
Southern Shipbuilding
Location:
Alaska

DR15-002

194.5'x40'x19' trawler, built in 1974 by Southern Shipbuilding, converted to fishing in 1990. Twin Cat mains rated at 3,300 hp ea, Reintjes gears and 4 blade variable pitch props. Hydraulic bow thruster. (3) Cat 3406B 290 kw gen sets. (6) fish holds refrigerated wit...

More Details

Sign up for email updates