Dock Street Brokers:

|< < > >|

1 - 50 of 262

All Vessel Listings

Vessels for Sale:

$55,000

PK10-003 Boat/Permit Pkgs
Year: 1976 Length: 32 Hull: Fiberglass Builder: Gilkison Boat Co. Location: Alaska
32’x10.8’x5.4’ fiberglass sternpicker built by Gilkison Boat Company in 1976. Cat T 3208 main rated at 260 hp. Gillnet reel with (6) nets included. VHF, Furuno 24 mile radar, EchoTec plotter and a Ross depth sounder. Vessel is available at $55,000, Cook Inlet Drift permit and vessel for $85,000.

$55,000

SP8-010 Sternpickers
Year: 1976 Length: 32 Hull: Fiberglass Builder: Gilkison Boat Co. Location: Alaska
32’x10.8’x5.4’ fiberglass sternpicker built by Gilkison Boat Company in 1976. Cat T 3208 main rated at 260 hp. Gillnet reel with (6) nets included. VHF, Furuno 24 mile radar, EchoTec plotter and a Ross depth sounder. Vessel is available at $55,000, Cook Inlet Drift permit and vessel for $85,000.

$550,000

CO10-004 Combination
Year: 1933 Length: 112 Hull: Steel Builder: US Navy Location: Washington
112’x30.5’x12.5’ combination tuna troller, crabber, tender built by the US Navy in 1933. Twin Cat 353 mains rated at 850 total hp. (2) Cat 3306 185 kw generators. 4 insulated fish holds totaling 10,200 sq ft. New 100 ton RSW system. 5 spool gurdies, crab block, pot launcher and crane. Abundant electronics. The vessel has undergone extensive shipyard work with over $450,000 spent in 2009. 20,000 gallons fuel capacity. 20,000 gallons water with water maker. 10 berths. Vessel does not have its Coastwise Trade and cannot legally tender fish but, it did have a contract in Bristol Bay as a net barge and chilled water for other tenders. Asking $550,000.

$550,000

TE10-006 Tenders
Year: 1933 Length: 112 Hull: Steel Builder: US Navy Location: Washington
112’x30.5’x12.5’ combination tuna troller, crabber, tender built by the US Navy in 1933. Twin Cat 353 mains rated at 850 total hp. (2) Cat 3306 185 kw generators. 4 insulated fish holds totaling 10,200 sq ft. New 100 ton RSW system. 5 spool gurdies, crab block, pot launcher and crane. Abundant electronics. The vessel has undergone extensive shipyard work with over $450,000 spent in 2009. 20,000 gallons fuel capacity. 20,000 gallons water with water maker. 10 berths. Vessel does not have its Coastwise Trade and cannot legally tender fish but, it did have a contract in Bristol Bay as a net barge and chilled water for other tenders. Asking $550,000.

$550,000

TN10-010 Tuna
Year: 1933 Length: 112 Hull: Steel Builder: US Navy Location: Washington
112’x30.5’x12.5’ combination tuna troller, crabber, tender built by the US Navy in 1933. Twin Cat 353 mains rated at 850 total hp. (2) Cat 3306 185 kw generators. 4 insulated fish holds totaling 10,200 sq ft. New 100 ton RSW system. 5 spool gurdies, crab block, pot launcher and crane. Abundant electronics. The vessel has undergone extensive shipyard work with over $450,000 spent in 2009. 20,000 gallons fuel capacity. 20,000 gallons water with water maker. 10 berths. Vessel does not have its Coastwise Trade and cannot legally tender fish but, it did have a contract in Bristol Bay as a net barge and chilled water for other tenders. Asking $550,000.

$550,000

CR10-016 Crabbers
Year: 1933 Length: 112 Hull: Steel Builder: US Navy Location: Washington
112’x30.5’x12.5’ combination tuna troller, crabber, tender built by the US Navy in 1933. Twin Cat 353 mains rated at 850 total hp. (2) Cat 3306 185 kw generators. 4 insulated fish holds totaling 10,200 sq ft. New 100 ton RSW system. 5 spool gurdies, crab block, pot launcher and crane. Abundant electronics. The vessel has undergone extensive shipyard work with over $450,000 spent in 2009. 20,000 gallons fuel capacity. 20,000 gallons water with water maker. 10 berths. Vessel does not have its Coastwise Trade and cannot legally tender fish but, it did have a contract in Bristol Bay as a net barge and chilled water for other tenders. Asking $550,000.

$50,000

CR10-017 Crabbers
Year: 1983 Length: 32 Hull: Aluminum Builder: Chris VanPeer Location: Washington
37’x14.2’x18” aluminum combination bowpicker, tender, built 1983 by Chris VanPeer. 300 hp Detroit 8.2 diesel engine. 1250 hours factory rebuilt. Twin Disc gear. Stern Power outdrive. Extremely economical, burns 4 gallons an hour at 2,600 rpm. Auto crane with a 25 ft extension, reel with level wind, shaker and power roller. 2” Pacer pump. Ray Marine color radar, (2) color sounders, 750 watt inverter and (2)VHF. Asking $50,000.

$50,000

BP10-007 Bowpickers
Year: 1983 Length: 32 Hull: Aluminum Builder: Chris VanPeer Location: Washington
37’x14.2’x18” aluminum combination bowpicker, tender, built 1983 by Chris VanPeer. 300 hp Detroit 8.2 diesel engine. 1250 hours factory rebuilt. Twin Disc gear. Stern Power outdrive. Extremely economical, burns 4 gallons an hour at 2,600 rpm. Auto crane with a 25 ft extension, reel with level wind, shaker and power roller. 2” Pacer pump. Ray Marine color radar, (2) color sounders, 750 watt inverter and (2)VHF. Asking $50,000.

$540,000

CR10-015 Crabbers
Year: 1978 Length: 67 Hull: Aluminum Builder: Freeman Marine Location: Oregon
67’x19.7’x9.9’ aluminum combination coastal crabber longliner built in 1978 by Freeman Marine. Twin Cummins KTA 855 M mains that are recently rebuilt. Twin Disc 514-C gears. Isuzu 20kw and 40 kw generators. Walk in bait freezer, full aluminum shelter deck, dungeness crab pot block, davit and line coiler. ComNav 1001 auto pilot, Furuno GPS, Icom IC-402 VHF, Furuno 24 mile and 48 mile radars, VMS, Furuno depth sounder, and a SSB. Competitive combination crabber, longliner. Asking 540,000 for boat only. WA and OR 500 pot permits and gear are available but not included in the price.

$540,000

LL10-006 Longliner
Year: 1978 Length: 67 Hull: Aluminum Builder: Freeman Marine Location: Oregon
67’x19.7’x9.9’ aluminum combination coastal crabber longliner built in 1978 by Freeman Marine. Twin Cummins KTA 855 M mains that are recently rebuilt. Twin Disc 514-C gears. Isuzu 20kw and 40 kw generators. Walk in bait freezer, full aluminum shelter deck, dungeness crab pot block, davit and line coiler. ComNav 1001 auto pilot, Furuno GPS, Icom IC-402 VHF, Furuno 24 mile and 48 mile radars, VMS, Furuno depth sounder, and a SSB. Competitive combination crabber, longliner. Asking 540,000 for boat only. WA and OR 500 pot permits and gear are available but not included in the price.

$200,000

BB10-021 Bristol Bay
Year: 1988 Length: 32 Hull: Aluminum Builder: Rozema Boatworks Location: Alaska
32’x14.6’ Bristol Bay gillnetter built in 1988 by Rozema Boatworks. Twin 6V53T rated at 600 total hp. Twin Disc 506 gears. 18,000 pounds capacity. RSW system is not operational and needs to be replaced. (3) station steering. 48” sliding reel, 52” Maritime Fabrications power roller. Icom 504 vhf, Icom 2 meter, Stingray flasher, Furuno color sounder, Raytheon pathfinder radar and a Garmin GPS. Nice clean vessel in turnkey condition. Asking $200,000.

$599,000

SE10-009 Seiners
Year: 1988 Length: 50 Hull: Fiberglass Builder: leClercq Marine Location: Alaska
50’x15’x6’ shallow draft fiberglass seiner built in 1988 by LeClercq Marine. 8V-92 TA main rated at 600 hp. Twin Disc MG 5111-A gear. Bow thruster. Isuzu 35 kw generator. Cold Sea 15 ton RSW with a Titanium chiller. 65,000 # capacity. Kolstrand deck winch, Marco power block, Pull Master winches and all aluminum rigging with a picking boom. Spare stainless steel shaft and propeller. This one owner vessel is in turnkey condition and ready to go. Asking $599,000.

$240,000

BB10-020 Bristol Bay
Year: 1997 Length: 32 Hull: Aluminum Builder: All American Location: Alaska
32’x14’ twin jet shallow draft Bristol Bay gillnetter built in 1997 by All American. Twin Cummins 6CTA mains with combined 800 hp. Twin Disc gears. 13” Hamilton Jets. Twin Cessna 2.77 cube pumps for hydraulics. Maritime Fabrication sliding reel with level wind, Kenimatics twister drive and (2) Maritime Fab power rollers on the stern and bow. Electronics include (2) West Marine VHF, Furuno plotter and a Furuno radar. Nice clean shallow draft gillnetter. Asking 240,000.

$119,000

BB8-035 Bristol Bay
Year: 1983 Length: 32 Hull: Aluminum Builder: Marine Hydraulic and Fabrication Location: Alaska
32’x15’x3’ aluminum flush deck Bristol Bay boat, built in 1983 by Marine Hydraulic and Fabrication in 1983. GM 8V92T rated at 425 hp. Twin Disc 511 2:1 gear. 500 gallon fuel and 50 gallon water capacities. Electronics include GPS, VHF, sounder, plotter, and autopilot. Asking $119,000.

$350,000

TE10-005 Tenders
Year: 1957 Length: 125 Hull: Steel Builder: Burton Shipbuilding Location: Washington
125’x32’x8.6’ steel tender, built in 1957 by Burton Shipbuilding in Texas. Twin Mitsubishi 6 cyl. mains rated at 469 hp each. Isuzu 175 kw, (2) 100 kw Cat 3406, and GMC 40 kw gen sets. Packs up to 500,000# in 6 fish holds with RSW. 17,000 gallons fuel, 14,000 gallons water. Full electronics w/ (3) SSB, (2) VHF, (2) GPS, (2) radar, and much more. (4) deck cranes. Great tender, good condition. Asking $350,000.

$137,500

TN10-009 Tuna
Year: 1975 Length: 46.6 Hull: Steel Builder: Barney Hill Location: Oregon
46.6’x13.7’x6.5’ steel troller, tuna, crabber built by Barney Hill in 1975. John Deere 6068T 225 hp main installed in 2001. Twin Disc 509 3:1 gear. Yanmar 5.5 kw aux. Rigged for troll, crab, and tuna. 1,000 gallons fuel, 200 gallons water capacities. Electronics include auto pilot, (2)GPS, (2)sounder, (2)radar, (2)VHF, and SSB. Includes Oregon Crab, Troll, and Scallop permits. Asking $137,500 for entire package.

$137,500

CR10-014 Crabbers
Year: 1975 Length: 46.6 Hull: Steel Builder: Barney Hill Location: Oregon
46.6’x13.7’x6.5’ steel troller, tuna, crabber built by Barney Hill in 1975. John Deere 6068T 225 hp main installed in 2001. Twin Disc 509 3:1 gear. Yanmar 5.5 kw aux. Rigged for troll, crab, and tuna. 1,000 gallons fuel, 200 gallons water capacities. Electronics include auto pilot, (2)GPS, (2)sounder, (2)radar, (2)VHF, and SSB. Includes Oregon Crab, Troll, and Scallop permits. Asking $137,500 for entire package.

$137,500

TR10-018 Trollers
Year: 1975 Length: 46.6 Hull: Steel Builder: Barney Hill Location: Oregon
46.6’x13.7’x6.5’ steel troller, tuna, crabber built by Barney Hill in 1975. John Deere 6068T 225 hp main installed in 2001. Twin Disc 509 3:1 gear. Yanmar 5.5 kw aux. Rigged for troll, crab, and tuna. 1,000 gallons fuel, 200 gallons water capacities. Electronics include auto pilot, (2)GPS, (2)sounder, (2)radar, (2)VHF, and SSB. Includes Oregon Crab, Troll, and Scallop permits. Asking $137,500 for entire package.

$85,000

TR10-016 Trollers
Year: 1973 Length: 40 Hull: Fiberglass Builder: Wahl Location: California
40’x11.6’x4.5’ fiberglass troller built by Wahl in 1973. Cat 3208 220 hp main with 2,900 hours installed in 1993. 3,000# fish hold with RSW and coils. 3 spool Easthope gurdies, aluminum mast and 40’ poles. Electronics include GPS, (3) VHF, radar, sounder, plotter, and auto pilot. Asking $85,000.

$277,000

PK10-002 Boat/Permit Pkgs
Year: 1987 Length: 32 Hull: Fiberglass Builder: Kachemak Marine Location: Alaska
Bristol Bay package...32’x15’ fiberglass Bristol Bay boat, built in 1987 by Kachemak Marine. 300 hp Cummins 6CTAB.3MI w/ 800 hrs., Twin Disc 507 gear. 1000 gallons fuel, 400 water. Drum w/ levelwind, Kolstrand power roller. Wagner hydraulic steering. Electronics include (2) VHF, Furuno radar, fathometer, (2) CB radios. 14 shackles of gear, (4) survival suits, Toyota car. Asking $132,000 for boat alone or $277,000 for boat with permit.

$132,000

BB10-011 Bristol Bay
Year: 1987 Length: 32 Hull: Fiberglass Builder: Kachemak Marine Location: Alaska
Bristol Bay package...32’x15’ fiberglass Bristol Bay boat, built in 1987 by Kachemak Marine. 300 hp Cummins 6CTAB.3MI w/ 800 hrs., Twin Disc 507 gear. 1000 gallons fuel, 400 water. Drum w/ levelwind, Kolstrand power roller. Wagner hydraulic steering. Electronics include (2) VHF, Furuno radar, fathometer, (2) CB radios. 14 shackles of gear, (4) survival suits, Toyota car. Asking $132,000 for boat alone or $277,000 for boat with permit.

$54,500

BP10-005 Bowpickers
Year: 1993 Length: 31 Hull: Fiberglass Builder: Martin Boat Inc. Location: Washington
31’x12’x2.5’ fiberglass “bowpicker” troller built by Martin Boats in 1993. Cummins 6BTA main installed in 2001. 2500 hours. ZF gear and surface piercing drive gives 22 knots. Rigged for power troll and has crab block. Very nice interior with galley, (2) berths, and head. Electronics include GPS, VHF, radar, sounder, and auto pilot. Asking $54,500.

$65,000

BB10-019 Bristol Bay
Year: 1976 Length: 32 Hull: Aluminum Builder: Shore Location: Alaska
32’x11’ aluminum flush decked Bay boat built by Shore in 1976. Cummins 6BT 250 hp main with 6000 hours. Twin Disk gear. Articulating reel with auto level wind. Electronics include GPS, (2)VHF, radar, (2)sounders, and bag phone. Asking $65,000. Available gear locker with 18 sets of lines of which 10 are 250# Samson Dura purchased in 2009 and other miscellaneous gear. Asking $65,000.

$750,000

TE10-004 Tenders
Year: 1981 Length: 130 Hull: Steel Builder: Eastern Marine Location: Washington
130’x30’x11.5’ steel tender/crabber. Built in 1981 by Eastern Marine. Twin Cat 3412 mains rated at 624 hp, does 12 kts. (2) 3306 Cat 190 kw and 6-71 GMC 75 kw gen sets. (2) deck cranes. Packs 500,000 lbs salmon in RSW. Call or email for survey. Asking $750,000, but try offers.

$750,000

CR10-013 Crabbers
Year: 1981 Length: 130 Hull: Steel Builder: Eastern Marine Location: Washington
130’x30’x11.5’ steel tender/crabber. Built in 1981 by Eastern Marine. Twin Cat 3412 mains rated at 624 hp, does 12 kts. (2) 3306 Cat 190 kw and 6-71 GMC 75 kw gen sets. (2) deck cranes. Packs 500,000 lbs salmon in RSW. Call or email for survey. Asking $750,000, but try offers.

$250,000

TR10-010 Trollers
Year: 1960 Length: 50.3 Hull: Wood Builder: Tacoma Boat Works Location: Washington
50.3’x14.6’x7.2’ wood troller built by Tacoma Boat in 1960. Cat D333A main and Capitol 4.52:1 gear. Lugger 5kw aux. 230/400 volt - 3 phase. 800 gallon fuel capacity in (4) tanks. Aluminum mast and poles with stainless wire. (2) sets of triple guirdies. Completely rewired and bonded in 2008. Electronics include VHF, radar, GPS, plotter, and sounder. Oregon and Alaska troll permits included. Asking $250,000.

$690,000

TE10-003 Tenders
Year: 1986 Length: 66 Hull: Steel Builder: Makie Location: Alaska
66’x22’x11’ steel combination longline, crabber, tender built in 1986 by Maki. Detroit 60 series main rated at 400 hp. Twin Disc 516 6:1 gear. 16” bow thruster. GM 6-71 20 kw generator with a Marco double pump PTO. John Deere 36 kw genset. Fuel oil centrifuge. 150,000# capacity in two insulated fish holds. 30 ton RSW. Electronics include Furuno radars, sounders, loud hailer, (2) VHF, sat phone, (3) GPS, laptop with Nobeltech charting software and a NavPilot 500 autopilot. Full tender setup includes fish pump, sorting table and weigh box. Longline operation includes longline hauler. Extremely versatile vessel in turnkey condition. Asking $690,000.

$690,000

CR10-012 Crabbers
Year: 1986 Length: 66 Hull: Steel Builder: Makie Location: Alaska
66’x22’x11’ steel combination longline, crabber, tender built in 1986 by Maki. Detroit 60 series main rated at 400 hp. Twin Disc 516 6:1 gear. 16” bow thruster. GM 6-71 20 kw generator with a Marco double pump PTO. John Deere 36 kw genset. Fuel oil centrifuge. 150,000# capacity in two insulated fish holds. 30 ton RSW. Electronics include Furuno radars, sounders, loud hailer, (2) VHF, sat phone, (3) GPS, laptop with Nobeltech charting software and a NavPilot 500 autopilot. Full tender setup includes fish pump, sorting table and weigh box. Longline operation includes longline hauler. Extremely versatile vessel in turnkey condition. Asking $690,000.

$690,000

CO10-003 Combination
Year: 1986 Length: 66 Hull: Steel Builder: Makie Location: Alaska
66’x22’x11’ steel combination longline, crabber, tender built in 1986 by Maki. Detroit 60 series main rated at 400 hp. Twin Disc 516 6:1 gear. 16” bow thruster. GM 6-71 20 kw generator with a Marco double pump PTO. John Deere 36 kw genset. Fuel oil centrifuge. 150,000# capacity in two insulated fish holds. 30 ton RSW. Electronics include Furuno radars, sounders, loud hailer, (2) VHF, sat phone, (3) GPS, laptop with Nobeltech charting software and a NavPilot 500 autopilot. Full tender setup includes fish pump, sorting table and weigh box. Longline operation includes longline hauler. Extremely versatile vessel in turnkey condition. Asking $690,000.

$690,000

LL10-005 Longliner
Year: 1986 Length: 66 Hull: Steel Builder: Makie Location: Alaska
66’x22’x11’ steel combination longline, crabber, tender built in 1986 by Maki. Detroit 60 series main rated at 400 hp. Twin Disc 516 6:1 gear. 16” bow thruster. GM 6-71 20 kw generator with a Marco double pump PTO. John Deere 36 kw genset. Fuel oil centrifuge. 150,000# capacity in two insulated fish holds. 30 ton RSW. Electronics include Furuno radars, sounders, loud hailer, (2) VHF, sat phone, (3) GPS, laptop with Nobeltech charting software and a NavPilot 500 autopilot. Full tender setup includes fish pump, sorting table and weigh box. Longline operation includes longline hauler. Extremely versatile vessel in turnkey condition. Asking $690,000.

$54,500

TR10-017 Trollers
Year: 1993 Length: 31 Hull: Fiberglass Builder: Martin Boat Inc. Location: Washington
31’x12’x2.5’ fiberglass “bowpicker” troller built by Martin Boats in 1993. Cummins 6BTA main installed in 2001. 2500 hours. ZF gear and surface piercing drive gives 22 knots. Rigged for power troll and has crab block. Very nice interior with galley, (2) berths, and head. Electronics include GPS, VHF, radar, sounder, and auto pilot. Asking $54,500.

$22,500

BB10-018 Bristol Bay
Year: 1980 Length: 32 Hull: Fiberglass Builder: Modutech Location: Alaska
32’x10.6’x30” fiberglass Bay boat built by Modutech in 1980. Rebuilt Cat 3208 260 hp main with approx 3,500 hours. Twin Disk 506 gear, spare gear included. Bow thruster with separate hydraulic pump. Articulating reel. Packs 10,000#’s. Electronics include GPS, VHF, sounder, and inverter. Asking $22,500.

$30,000

BB10-017 Bristol Bay
Year: 1980 Length: 32 Hull: Fiberglass Builder: Rawson Location: Alaska
32’x10’8” Rawson, combo cabin with fly bridge. Built in 1980. Volvo 60B w/ appr. 3,800 hrs on 2004 rebuild, Twin Disk 506 gear, also rebuilt in 2004. (2) fuel tanks, 200 gallon total. Fixed narrow reel w/ levelwind, power roller. Sound anchor winch. All new hydraulics in ‘06, including pump, valves, and all hoses. Expanded fish hold and deck space. (2) sounders, VHF, Garmin GPS. Asking $30,000.

$310,000

SE10-008 Seiners
Year: 1960 Length: 61.6 Hull: Steel Builder: John Manly Location: Canada
61.6’x21.6’x8.9’ steel seiner built by Manly in 1960, rebuilt in 1977. New house in 1996. Sponsoned in 2000, and then from 2002 to present the vessel has been completely restored from stem to stern. Cat D343 main and Twin Disk 514 gear both with 6000 hours on total rebuilds. Gardner aux. for hydraulics. Isuzu 10kw gen set. Packs 120,000#’s in three glassed holds. Yacht quality cabin. Electronics include GPS, (2) VHF, SSB, (2) computer, radar, sounder, and auto pilot. Asking $310,000.

$349,000

CO10-002 Combination
Year: 1973 Length: 42 Hull: Fiberglass Builder: Bruno and Stillman Location: California
42’x13’x3’ fiberglass lobster/gillnet built by Bruno and Stillman in 1973. Cat 3306 300 hp main. Twin Disk 509 gear. 300 gallon fuel capacity. 24 gallon hydraulic pump powers drum anchor windlass and 14” stainless trap puller. Full galley. Electronics include radar, (2) sounders, (2) VHF radios, (2) GPS, Nobeltec, and autopilot. Solas life raft and all safety equipment. Also included are California lobster and general gillnet permits. 24’ Blackman fiberglass skiff with 350/280 Volvo I/O, 70 gallon fuel, 14” puller, GPS, VHF, sounder. 900+ vinyl traps completely rigged with lines and buoys. Tools extra zincs, buoys, and receivers. This is a complete turn key inshore and offshore California lobster and general gillnet operation. Asking $349,000.

$349,000

CR10-010 Crabbers
Year: 1973 Length: 42 Hull: Fiberglass Builder: Bruno and Stillman Location: California
42’x13’x3’ fiberglass lobster/gillnet built by Bruno and Stillman in 1973. Cat 3306 300 hp main. Twin Disk 509 gear. 300 gallon fuel capacity. 24 gallon hydraulic pump powers drum anchor windlass and 14” stainless trap puller. Full galley. Electronics include radar, (2) sounders, (2) VHF radios, (2) GPS, Nobeltec, and autopilot. Solas life raft and all safety equipment. Also included are California lobster and general gillnet permits. 24’ Blackman fiberglass skiff with 350/280 Volvo I/O, 70 gallon fuel, 14” puller, GPS, VHF, sounder. 900+ vinyl traps completely rigged with lines and buoys. Tools extra zincs, buoys, and receivers. This is a complete turn key inshore and offshore California lobster and general gillnet operation. Asking $349,000.

$287,000

LC10-001 Landing Crafts
Year: 2004 Length: 37 Hull: Aluminum Builder: Latitude Marine Location: Washington
37’x12’ aluminum landing craft built by Latitude Marine in 2004. COI for 28 passengers and two crew. Twin 315hp Yanmar 6LPA mains, with 6,600 hours. Huber 920 transmissions and Konrad 520 outdrives. Indoor seating for 18 passengers, outdoor seating for 10. 15 person life float. Electronics include, radar, GPS plotter, sounder and VHF. Asking $287,000.

$287,000

PS10-001 Passenger
Year: 2004 Length: 37 Hull: Aluminum Builder: Latitude Marine Location: Washington
37’x12’ aluminum landing craft built by Latitude Marine in 2004. COI for 28 passengers and two crew. Twin 315hp Yanmar 6LPA mains, with 6,600 hours. Huber 920 transmissions and Konrad 520 outdrives. Indoor seating for 18 passengers, outdoor seating for 10. 15 person life float. Electronics include, radar, GPS plotter, sounder and VHF. Asking $287,000.

$100,000

CR10-009 Crabbers
Year: 1942 Length: 38.9 Hull: Wood Builder: Andrew Pakonen Location: Oregon
38.9’x10’x5’ combination troller, crabber built in 1942. GMC 371 main rated at 100 hp. Twin Disc gear. Crab block, 2,000# tank insert, davit and gurdies. Furuno GPS, radar, sitex sounder, Wood Freeman autopilot and a VHF. 300 pot Oregon crab permit, 200 pots and a Oregon troll permit included. Asking $100,000.

$100,000

TR10-013 Trollers
Year: 1942 Length: 38.9 Hull: Wood Builder: Andrew Pakonen Location: Oregon
38.9’x10’x5’ combination troller, crabber built in 1942. GMC 371 main rated at 100 hp. Twin Disc gear. Crab block, 2,000# tank insert, davit and gurdies. Furuno GPS, radar, sitex sounder, Wood Freeman autopilot and a VHF. 300 pot Oregon crab permit, 200 pots and a Oregon troll permit included. Asking $100,000.

$190,000

BB10-016 Bristol Bay
Year: 1989 Length: 32 Hull: Aluminum Builder: Workboats NW Location: Alaska
32’x15’ aluminum Bristol Bay gillnetter, built 1989 by Workboats Northwest. Twin 400 hp GMC 6V53 mains, one brand new post-2010 season, one w/ appr. 4,300 hrs. Twin Disc 507 gears. Flush deck, drum w/ new auto levelwind, Vitek power roller. Packs approximately 16,000# in fish holds. Holds are plumbed for RSW. Large, comfortable cabin. Good electronics including new Furuno radar/plotter/GPS, multiple depth sounders, VHF, 2000 watt inverter and more. Asking $190,000.

$40,000

CH10-005 Charter
Year: 1973 Length: 36 Hull: Fiberglass Builder: Uniflite Location: California
36’x12’ fiberglass charter boat, current COI for 20 passengers. Very clean, well maintained boat, kept in fresh water. Twin gas 440 Chryslers, does 18 knots. Electronics include GPS, VHF, radar, and plotter. Comfortable salon with good seating, sink and fridge. Electric anchor windlass, canvas bimini. Stored under cover. Asking $40,000.

$150,000

TR10-014 Trollers
Year: 1999 Length: 55 Hull: Steel Location: Oregon
55’x 15.1’x 4.1’ steel freezer troller built in 1999. Rigged with blast freeze for Salmon and Tuna. Packs 30,000# in fish hold. GMC 6-71 main, 50 hours since rebuilt, w/ Twin Disc reduction gear. Perkins 20kw aux. Electronics include GPS, VHF, SSB, radar, sounder, plotter, and auto pilot. Safety equipment includes, new 4 man life raft and complete alarm system. $150,000 FIRM for boat only.

$350,000

CA10-002 Cargo
Year: 1946 Length: 138 Hull: Steel Builder: Mathis Location: Washington
138’x23’x11’ freezer boat built in 1946, converted to longliner in 1980. Currently fishing and processing gear is removed, but all freezing equipment is on vessel. 875 hp 6 cyl. Wickman main w/ C/P prop and Kort nozzle. Volvo 176 kw, Volvo 200 kw, and Deere 80 kw gen sets. 6,000 cubic foot freezer hold. (2) Sabroe compressors. Accommodations for captain and 18 crew. Full complement of electronics. Asking $350,000.

$350,000

LL10-003 Longliner
Year: 1946 Length: 138 Hull: Steel Builder: Mathis Location: Washington
138’x23’x11’ freezer boat built in 1946, converted to longliner in 1980. Currently fishing and processing gear is removed, but all freezing equipment is on vessel. 875 hp 6 cyl. Wickman main w/ C/P prop and Kort nozzle. Volvo 176 kw, Volvo 200 kw, and Deere 80 kw gen sets. 6,000 cubic foot freezer hold. (2) Sabroe compressors. Accommodations for captain and 18 crew. Full complement of electronics. Asking $350,000.

$25,000

DV10-001 Dive
Year: 1987 Length: 26 Hull: Fiberglass Builder: owner Location: Washington
26’x9’x2.5’ fiberglass combination skiff built in 1987. 350 Chev gas main with less than 800 hours. New 97 gallon aluminum fuel tank. 20 knot cruise. Fuel tanks, Aft deck, and gunnels new in 2009. Aluminum crab davit, 8” block with quick disconnects, spare prop and a storage tote. V berth provides storage. Electronics include a VHF and a sounder. 8’x11.6” of open deck. Galvanized tandem axle trailer with surge brakes and new tires. Asking $25,000 or possible trade.

$25,000

CR10-008 Crabbers
Year: 1987 Length: 26 Hull: Fiberglass Builder: owner Location: Washington
26’x9’x2.5’ fiberglass combination skiff built in 1987. 350 Chev gas main with less than 800 hours. New 97 gallon aluminum fuel tank. 20 knot cruise. Fuel tanks, Aft deck, and gunnels new in 2009. Aluminum crab davit, 8” block with quick disconnects, spare prop and a storage tote. V berth provides storage. Electronics include a VHF and a sounder. 8’x11.6” of open deck. Galvanized tandem axle trailer with surge brakes and new tires. Asking $25,000 or possible trade.

$30,000

TR10-011 Trollers
Length: 32 Hull: Fiberglass Builder: Jones Location: Oregon
34’x11.6’x4’ fiberglass troller, built by Jones. Cat 3208 main, 210 hp, 4000 hrs on rebuild. Twin Disc 506 gear. 12,000# hold capacity. (4) single spool Kolstrand gurdies. Electronics include GPS, VHF, CB, radar, (2) sounders, plotter, and autopilot. Safety equipment includes (6) man life raft, (2) survival suits, and alarm system. Asking $30,000

$80,000

BP10-004 Bowpickers
Year: 1988 Length: 32 Hull: Aluminum Builder: Kimura Location: Canada
32’x12’x4’ aluminum bowpicker built by Kimura in 1988. Twin KAMD 42 Volvo rated at 230 hp with less than 3,100 hours. 290 D.P Volvo out drives. 9,000# capacity in three insulated fish holds. Gillnet drum. Furuno GPS, Goldstar radar, (2) VHF, Simrad sounder and a computer with Nobeltec chart plotter and navigation software. Asking $80,000.

$50,000

TR10-012 Trollers
Year: 1960 Length: 40 Hull: Wood Builder: Peterson Location: Alaska
40’x12’x5.8’ wood troller. Built in 1960 by Peterson. GMC 4-71 main. Good electronics and wood Freeman auto pilot. Holds over 20,000 lbs. salmon. Head with shower. Lot of new woodwork and other recent work. Asking $50,000.